Features:
- The CompactFlash medium carries SINAMICS S120 firmware version 4.4 for the target control unit.
- Its licensed configuration includes the performance-expansion firmware option.
- The supplied Certificate of License belongs to the identified card configuration.
The full order code of 6SL3054-0EE01-1BA0 identifies both firmware generation and licensed performance level.
During startup, 6SL3054-0EE01-1BA0 supplies the CU320-2 with its stored operating software and license data.
Card, license record, and target control-unit generation are checked together before 6SL3054-0EE01-1BA0 enters service.
The Siemens 6SL3054-0EE01-1BA0 SINAMICS S120 CompactFlash Card with Performance Expansion License may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6SL3054-0EE01-1BA0 SINAMICS S120 CompactFlash Card with Performance Expansion License Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Boot-Media Function
- Stored release: The card carries the identified SINAMICS firmware V4.4.
- Startup: The CU320-2 reads the operating software from the inserted medium.
- Release match: The card generation is checked against the intended control-unit configuration.
- Controlled setup: Firmware and drive project are maintained as separate but coordinated elements.
Performance-Expansion Identity
- Option level: The order code identifies the performance-expansion version.
- Certificate: The included Certificate of License documents the licensed configuration.
- Card binding: The physical medium and license record remain associated with the intended setup.
- Order-code check: The complete suffix distinguishes this card from the basic-performance version.
Control-Unit Matching
- Target platform: The card is specified for the SINAMICS S120 CU320-2 control unit.
- Hardware check: Control-unit generation is verified before the card is installed.
- Project check: Drive configuration and firmware branch must support the intended functions.
- Startup boundary: The card is inserted only with control power handled under the documented procedure.
Media and Configuration Control
- Identification: The full order number remains readable on the card and license record.
- ESD protection: The electronic medium is handled with appropriate electrostatic precautions.
- Storage: The card is kept protected from contamination and mechanical damage.
- Recordkeeping: Firmware and license details are recorded with the target drive configuration.