Features:
- Provides the SINAMICS replacement power stage for a 675-1080 V DC link.
- Carries the Siemens-documented 810 A current rating.
- Is supplied as a spare power block rather than a complete drive system.
The assembly is the high-current replacement power block for the documented SINAMICS drive execution, carrying the DC-link energy through the semiconductor power stage associated with the drive chassis.
Within the configured converter, controlled semiconductor devices switch DC-link power according to gate commands from the drive electronics. The resulting controlled power flow produces the motor-side voltage and current required by the drive system.
Match the full article number, drive frame, voltage class, current rating and cooling arrangement. Adjacent 6SL3352 power blocks with different suffixes or current ratings are not interchangeable.
Availability is reviewed against the exact 6SL3352-1AG38-1FA1 order identity and requested supply condition; manufacturer lifecycle status: Active / Available from OEM.
Verified resources for Siemens 6SL3352-1AG38-1FA1:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- This article is supplied as a spare power block rather than a complete drive. It is intended to restore the original chassis configuration whose DC-link range and 810 A rating match the installed unit.
- The power block must be isolated from all hazardous voltages and the DC link must be fully discharged before service. Gate connections, bus bars, cooling interfaces and insulation clearances are part of the replacement check.
- Requires exact frame, voltage, cooling and gate-interface matching.
- Serves as the high-current power block for the documented SINAMICS chassis.
- Controlled semiconductors convert DC-link energy into regulated motor-side power.
- The complete article suffix must match the installed drive frame.
- Operates across a 675 to 1080 V DC-link range.
- Rated current is 810 A for the documented power-block execution.
- Isolation and discharge procedures are required before handling the assembly.
- Listed by Siemens as a PM300 active spare part.
- Net weight is documented as 86.0 kg.
- Product record identifies Germany as the country of origin.