Features:
- Four 24 V DC standard digital outputs
- 0.5 A rated current per output channel
- 15 mm SIMATIC ET 200S electronic module
Within an ET 200S station, 6ES7132-4BD00-0AA0 sends four commanded 24 V DC output states to field loads.
The ET 200S power module feeds L+ to 6ES7132-4BD00-0AA0, and each channel is rated at 0.5 A.
One byte of address space and short-circuit protection define the output-stage behavior of this 15 mm module.
The Siemens 6ES7132-4BD00-0AA0 ET 200S Digital Output Module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6ES7132-4BD00-0AA0 ET 200S Digital Output Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Output Command Path
- Channels: Four output commands are available.
- Output state: Each command drives the field-load side.
- Addressing: One byte is allocated.
Load Supply
- Source: L+ comes from the ET 200S power module.
- Voltage: Outputs use 24 V DC.
- Channel rating: 0.5 A applies per output.
Switching Limits
- 0-to-1: Up to 100 microseconds is specified.
- 1-to-0: Up to 300 microseconds is specified.
- Power loss: Typical dissipation is 0.8 W.
Protection Response
- Short circuit: Protection is integrated.
- Threshold: Typical response is 0.7 to 1.5 A.
- Reverse polarity: Protection applies with the same power-module load voltage.