Features:
- One type D0 base provides the field terminals and backplane contact for a single ET 200SP I/O module.
- Twelve push-in process terminals accept conductors from 0.14 to 2.5 mm².
- P1 and P2 continue the potential group from the left without creating a new supply group.
Siemens 6ES7193-6BP00-0BD0 fixes the wiring layer beneath one removable I/O module.
Its power rails pass the existing station potential through the base while individual terminals serve the module channels.
Automatic coding preserves the relationship between the installed module and its station position.
The Siemens 6ES7193-6BP00-0BD0 ET 200SP BU20-P12+A0+0B BaseUnit may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6ES7193-6BP00-0BD0 ET 200SP BaseUnit Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Potential-Rail Loading
- P1/P2 path: The two station rails carry a combined maximum of 10 A through the base.
- Process terminals: Each field terminal is limited to 5 A.
- Continuation: The potential group enters from the left-hand base and passes onward.
- No new group: A separate supply group must start on a BaseUnit designed for that function.
Field Conductor Connection
- Range: Prepared conductors from 0.14 to 2.5 mm² fit the push-in terminals.
- Channels: Twelve process terminals serve the installed I/O module.
- Retention: Spring pressure holds each conductor without screw torque.
- Service: Field wiring remains on the BaseUnit when the electronic module is removed.
Single-Position Assembly
- Slot: The base provides one ET 200SP I/O-module position.
- Coding: Automatic coding matches the terminal base to the selected module.
- Backplane: The rear contacts connect the position to the station bus.
- Width: The 20 mm base establishes the mechanical spacing in the station.
Mounting Temperature Limits
- Horizontal: The operating range is -30 to +60 °C.
- Vertical: The operating range is -30 to +50 °C.
- Altitude: Installation is specified up to 2000 m above sea level without a special request.
- Enclosure: Cabinet conditions must keep the terminal base within its documented temperature boundary.