Features:
- The 10.1-inch touch display and mobile enclosure bring visualization to the operator position.
- Dedicated stop, acknowledgement, key, and illuminated controls remain separate from touch commands.
- Network, USB, and SD paths divide controller communication from removable data handling.
Siemens 6AV2145-6KB20-0AS0 is the fail-safe TP1000F Mobile panel for touch-based operator control.
Its physical safety controls send their configured states through the approved safety communication arrangement rather than through ordinary screen buttons.
The shared PROFINET/Industrial Ethernet interface of 6AV2145-6KB20-0AS0 carries the configured controller and Ethernet services on one network connector.
The Siemens 6AV2145-6KB20-0AS0 TP1000F Mobile HMI Panel may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6AV2145-6KB20-0AS0 TP1000F Mobile HMI Panel Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Physical controls remain available beside the touchscreen
- Touch input: The widescreen display accepts single-touch operation and onscreen keyboard entry.
- Access selection: The key-operated switch provides a separate project input from the display surface.
- Acknowledgement: The three-stage device reports released, enabled, and fully pressed positions to the configured safety function.
- Illuminated control: The pushbutton combines an operator command with project-defined visual indication.
Where the panel's safety-related signals belong
- Stop device: The forced-blocking illuminated button is a physical safety control, not an HMI screen object.
- Safe communication: PROFIsafe transports the configured safety data over the network relationship.
- Rating scope: PLe and SIL 3 apply only in the approved safety mode and system architecture.
- Project separation: Ordinary touch functions do not inherit the rating of the safety control circuit.
One network connector and two removable-data paths
- Combined port: PROFINET and Industrial Ethernet share the panel's single physical network interface.
- Controller traffic: PROFINET IO and PROFIsafe use the project-defined relationship on that connection.
- USB path: USB 2.0 supports the documented peripheral and storage functions.
- SD path: The card slot holds supported project, archive, recipe, or transfer data outside internal memory.
Limits that travel with the mobile panel
- Housing seal: IP65 applies around the complete mobile enclosure.
- Operating temperature: The panel is specified for 0°C through 45°C in service.
- Storage boundary: Unpowered transport and storage extend from -20°C to 60°C.
- Handling test: The published free-fall height is 1.2 m and does not replace the required handling and cable controls.