Features:
- The 12.1-inch multi-touch display renders 1280x800 process screens with 16.7 million colors.
- One Gigabit Ethernet port carries PROFINET and standard TCP/IP-based communication.
- WinCC Unified runtime functions include alarms, recipes, archives, user roles and scheduled tasks.
The runtime supports 32 project languages and 32 online languages, allowing the configured operator interface to switch language without changing the hardware.
A project can organize as many as 1,000 device variables across 300 configurable screens, with alarm and recipe objects arranging process data for operator use.
Archive data can be written to USB memory; the hardware does not provide an SD-card slot.
The Siemens 6AV2123-3MB32-0AW0 MTP1200 Unified Basic HMI Panel may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6AV2123-3MB32-0AW0 MTP1200 Unified Basic HMI Panel Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Operator input path
- Display surface: The widescreen TFT presents the configured process objects on a 261.1x163.2 mm active area.
- Touch method: Multi-touch operation lets the runtime distinguish gestures and direct object selection.
- Onscreen entry: Numeric and alphanumeric keyboards are supplied by the runtime rather than physical keys.
- Orientation: The same panel can be mounted in landscape or portrait format within the stated temperature limits.
Controller and service connections
- IE/PN port: The RJ45 Gigabit Ethernet interface carries the PROFINET link to the controller network.
- S7 channels: Up to eight configured S7 connections can exchange runtime variables with automation devices.
- Network services: TCP/IP, DHCP, SNMP, DCP and LLDP support addressing, discovery and management on Ethernet.
- USB boundary: Two USB 2.0 ports serve removable storage and supported transfers, not fieldbus communication.
WinCC Unified project structure
- Engineering baseline: Configuration starts with WinCC Unified Basic V18 Update 3 or a later supported release.
- Screen scope: A project can contain 300 configurable screens and up to 600 objects on one screen.
- Alarm handling: Bit, analog and S7 alarm-number messages can be acknowledged and retained in the alarm archive.
- Data records: Recipe types and process archives organize operator-entered values and historical process data.
Cabinet mounting boundaries
- Cutout: The enclosure opening is 310x221 mm for the 326x237 mm front frame.
- Depth: The 55 mm overall depth must remain inside the protected cabinet volume.
- Front and rear: The installed front reaches IP65 and NEMA 4/4x, while the rear is IP20.
- Inclination: Operation without external ventilation permits an inclination of up to 35 degrees, with lower temperature limits in portrait mode.