Features:
- Combines a 5.7-inch touch display with dedicated function keys.
- Connects automation systems through MPI/PROFIBUS DP or Industrial Ethernet.
- Provides an MMC slot for supported removable-media operations.
Siemens 6AV6642-0DA01-1AX1 presents 320×240-pixel, 256-color process screens on the OP177B front surface.
Separate communication ports let the HMI project assign controller traffic, network access and supported peripherals to their intended channels.
Cabinet mounting keeps the protected operator surface outside while the IP20 rear connections remain inside the enclosure.
The Siemens 6AV6642-0DA01-1AX1 SIMATIC OP177B 6-inch PN/DP Operator Panel may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6AV6642-0DA01-1AX1 SIMATIC OP177B 6-inch PN/DP Operator Panel Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Touch and Key Interaction
- Touch Input: The display surface accepts touch commands from configured WinCC flexible screens.
- Function Keys: Physical function keys provide a second operating method alongside the touchscreen.
- Panel Display: Status pages, alarms and operator entries are presented through the same 5.7-inch panel face.
Controller and Ethernet Paths
- MPI/DP Port: The MPI/PROFIBUS DP port carries cyclic communication with the assigned automation system.
- Ethernet Path: The Ethernet interface supplies a separate 10/100 Mbit/s network path.
- Service Interfaces: RS422/RS485 and USB connections remain available for supported serial and peripheral functions.
Panel Memory and Removable Media
- Internal Memory: The configured HMI project is stored in the internal panel memory.
- MMC Slot: An MMC slot provides a removable medium for supported project and data operations.
- Project Retention: Storage planning must preserve the complete 6AV6642-0DA01-1AX1 project before hardware exchange.
Engineering and Download Route
- Engineering Tool: WinCC flexible 2005 is the engineering environment specified for the panel.
- Project Definition: A configured project defines the screen objects, communication channel and operator functions.
- Transfer Path: The transfer route must match the interface selected in both the panel settings and engineering project.