Features:
- Equipped with a high-resolution CCD chip to accurately capture and decode ECC200 2D data matrix codes in harsh factory environments
- Specifically calibrated to reliably read codes printed or engraved on challenging materials like curved metal, shiny plastic, or moving components
- Built with an IP40-rated housing (VS 710 series) to resist dust and debris, operating on standard 24V DC industrial power
The 6GF1710-3AA utilizes a CCD (Charge-Coupled Device) sensor, which is superior to standard CMOS sensors in industrial settings . CCD sensors provide higher light sensitivity and significantly lower electronic noise, which is critical when capturing high-contrast codes on reflective metal surfaces. This technology allows the device to maintain image clarity even in low-light conditions or when dealing with fast-moving production line items.
The 6GF1710-3AA excels in reading codes under adverse visual conditions that would typically cause sensor failure . It is engineered to handle "Distorted Code" reading, meaning it can successfully decode a 2D matrix even if the substrate is bent, warped, or rotating at high speed during the scanning process. Furthermore, it features specialized algorithms for "Diffuse Reflection," which prevents false readings caused by glare from glossy packaging or machined metal parts.
Designed for the factory floor, the 6GF1710-3AA meets specific industrial durability standards. The unit is housed in a robust IP40-rated enclosure, protecting the internal optics from solid foreign objects larger than 1mm, such as airborne dust or fine fibers . It operates efficiently with low power consumption, utilizing a standard 24V DC supply and drawing only 0.5 Amps (approx. 5 Watts), which allows for easy integration into existing PLC control cabinets without heavy power infrastructure .
The 6GF1710-3AA Siemens Vision Sensor may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6GF1710-3AA Vision Sensor Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
Siemens 6GF1710-3AA Vision Sensor Specs
General
- Manufacturer Siemens
- Model 6GF1710-3AA
- Condition New Original ready stock
- Product Family
6GK1143-0TA00,6GK1543-1AA01,6GT2002-0AA00
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Automotive Manufacturing: Inspecting complex parts assembly, checking body-in-white alignments, and component tracking.
- Food & Beverage Packaging: Verifying label orientation, expiration date print placement, and container fill levels.
- Pharmaceutical & Medical Devices: Checking blister pack completeness, pill count validation, and barcode/data-matrix tracking.
- Electronics Assembly: Inspecting Printed Circuit Board (PCB) component presence, pin alignment, and soldering clarity.
- Resolution Support: Capable of processing image formats with configurations up to 768 x 512 pixels.
- Integrated Communication: Features an on-board PROFIBUS DP interface for seamless fieldbus communication and low-latency integration into SIMATIC PLC setups.
- Storage and Memory: Equipped with 16 MB of expanded main memory along with a 16 MB internal flash disk to locally hold inspection logic and data arrays
- Shutter & Capturing: Supports flexible half-image and full-image scanning modes with electronic exposure speeds reaching down to 1/10000s to handle fast-moving lines.
- Edge Processing: Performs object localization, image evaluation, and decision-making (Pass/Fail) directly within the vision sensor, sparing the main programmable logic controller (PLC) from heavy mathematical computing.
- Configurable Setup via ProVision: Utilizes Siemens ProVision configuration tools to quickly deploy matching models and identical scanning presets, reducing integration and commissioning times.
- Low System Footprint: Drawing only 5 Watts of power, it delivers robust localized computing without needing external evaluation computers or active cooling systems.