Features:
- SIMATIC S7-1200 SM 1232 module with two voltage or current outputs.
- +/-10 V with 14-bit resolution or 0-20/4-20 mA with 13-bit resolution.
- 24 V DC operation, 1.8 W power loss and integrated output diagnostics.
The Siemens
6ES7232-4HB32-0XB0 SM 1232 analog output module supplies two configurable output channels for SIMATIC S7-1200 systems.
Each channel can be selected for the official voltage or current ranges, subject to the specified load and wiring requirements.
Project selection should confirm the output mode, connected load, gold front connector and S7-1200 hardware configuration.
The Siemens 6ES7232-4HB32-0XB0 SIMATIC S7-1200 SM 1232 Analog Output Module may be available for quotation, official technical documentation and sourcing support from Apter Power. Availability and lead time are confirmed at inquiry.
Siemens 6ES7232-4HB32-0XB0 SM 1232 Analog Output Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Siemens 6ES7232-4HB32-0XB0 SM 1232 Analog Output Module Specs
General
- ManufacturerSiemens
- Model6ES7232-4HB32-0XB0
- ConditionNew Original ready stock
- Product FamilySIMATIC S7-1200 SM 1232 Analog Output
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Analog Outputs:
- Channels: Two configurable voltage or current outputs.
- Voltage mode: +/-10 V with 14-bit resolution.
- Current mode: 0-20 mA or 4-20 mA with 13-bit resolution.
Configure each Siemens 6ES7232-4HB32-0XB0 channel for the required output mode and connected load.
Diagnostics:
- Range monitoring: Overflow and underflow detection.
- Voltage mode: Short-to-ground detection.
- Current mode: Wire-break detection.
- Supply monitoring: Low 24 V DC indication.
Diagnostic behavior for 6ES7232-4HB32-0XB0 depends on the configured output mode and alarm settings.
Wiring:
- Front connector: Siemens specifies gold connectors.
- Voltage load: At least 1000 ohms.
- Current load: Up to 600 ohms.
- Maximum cable length: 100 m, twisted and shielded.
Use the official 6ES7232-4HB32-0XB0 wiring and connector-pin tables in the Manuals tab when preparing field connections.