Features:
- SIMATIC form factor: PM 1507 supply for S7-1500 installations
- Regulated output: 24 V DC at 8 A for automation loads
- Wide input choice: documented 120/230 V AC operation
6EP1333-4BA00 provides a dedicated regulated 24 V DC source within a SIMATIC S7-1500 cabinet.
Its 8 A rating must be evaluated against continuous load, startup inrush and downstream protection rather than treated as available margin.
Procurement and commissioning should retain the full catalog, input setting, protection design, current calculation, terminal records and enclosure conditions.
Availability of 6EP1333-4BA00 is subject to Apter Power inventory and sourcing confirmation.
Verified resources for 6EP1333-4BA00:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Nominal input: verify the 120 or 230 V AC supply arrangement.
- Branch protection: select upstream protection from the official installation data.
- Conductors: size wiring and terminals for the documented circuit.
- Isolation: provide a safe means to de-energize the supply for service.
- Continuous demand: keep the connected load within 8 A.
- Inrush: include controllers, I/O and field devices during startup.
- Distribution: separate protected branches where the cabinet design requires it.
- Diagnostics: measure output voltage at the supply and critical loads.
- Placement: maintain the official mounting orientation and clearances.
- Thermal path: account for enclosure temperature and neighboring heat sources.
- Service access: keep terminals and protection devices identifiable.
- Hazardous areas: do not infer Ex approval for this catalog.
- S7-1500 stations: provide regulated 24 V DC for controller-related loads.
- Automation cabinets: convert plant AC power for protected DC distribution.
- Machine controls: supply approved 24 V DC devices within the calculated 8 A budget.