Features:
- Compact S7-1500 control: Runs machine and process logic with 150 KB program memory.
- Integrated PROFINET: Provides IRT communication through a two-port switch.
- Fast bit execution: Delivers 60 ns bit performance for responsive sequencing.
6ES7511-1AK02-0AB0 is the CPU 1511-1 PN at the center of a compact S7-1500 automation station.
Its integrated PROFINET ports connect distributed devices while the controller executes logic and maintains diagnostic data.
The required SIMATIC memory card carries essential project information and must be included in backup and recovery planning.
For 6ES7511-1AK02-0AB0 sourcing, Apter Power can help confirm project, firmware, memory-card and PROFINET requirements. Siemens 6ES7511-1AK02-0AB0 is listed as SIMATIC S7-1500 CPU 1511-1 PN.
Siemens 6ES7511-1AK02-0AB0 SIMATIC S7-1500 CPU 1511-1 PN Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Program memory: 150 KB.
- Data memory: 1 MB.
- Bit execution: 60 ns.
- Storage: SIMATIC memory card is mandatory.
- Protocol: PROFINET IRT for deterministic communication.
- Ports: Integrated two-port switch.
- Device scope: Connects compatible distributed I/O, drives and HMIs.
- Migration: Preserve device names, IP settings and topology records.
- Project backup: Archive the online project before removal.
- Firmware: Match controller and project requirements.
- Memory card: Verify card contents before first startup.
- Successor: Re-engineer the migration to 6ES7511-1AL03-0AB0 rather than assuming direct interchange.
- Machine control: Runs compact sequencing, interlocks and motion coordination.
- Packaging: Connects distributed I/O and drives over PROFINET.
- Skid automation: Combines local logic and Ethernet diagnostics in one CPU.
- Legacy S7-1500 service: Restores an installed CPU 1511-1 PN project.