Features:
- CPU 1515F-2 PN executes standard and fail-safe logic up to SIL 3 and PLe system levels.
- Program and data processing use separate 750 KB and 3 MB work-memory areas.
- Two PROFINET interfaces divide IRT switching and independent RT communication.
Siemens 6ES7515-2FM01-0AB0 uses an integrated display and mode controls to expose CPU status while the control program runs in the S7-1500F station.
X1 supplies PROFINET IRT through a two-port switch, whereas X2 supplies one separate PROFINET RT port for an additional network connection.
A required SIMATIC Memory Card holds the load project, while the CPU keeps program and data work memory in distinct internal areas.
The Siemens 6ES7515-2FM01-0AB0 SIMATIC S7-1500F CPU 1515F-2 PN may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6ES7515-2FM01-0AB0 SIMATIC S7-1500F CPU 1515F-2 PN Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Safety Program Execution
- CPU function: Standard and fail-safe blocks execute in one CPU 1515F-2 PN.
- Safety level: A correctly engineered system can reach SIL 3 and PLe.
- Hardware status: The documented functional status is FS03.
- Project control: Safety signature and hardware configuration belong with the backed-up CPU project.
Two-Interface Network Layout
- X1 function: PROFINET IRT is combined with an integrated two-port switch.
- X2 function: A separate one-port PROFINET RT interface supports another network path.
- Controller role: Both interfaces support documented PROFINET IO controller operation.
- Device role: PROFINET IO device functionality is available for configured data exchange.
Program, Data, and Load Areas
- Program memory: Control code uses 750 KB of integrated work memory.
- Data memory: Data blocks use a separate 3 MB work-memory area.
- Load storage: A SIMATIC Memory Card is mandatory for the project image.
- Card capacity: Plug-in load memory is supported up to 32 GB.
Power, Software, and Orientation
- Supply window: The 24 V DC input permits 19.2 to 28.8 V.
- Backplane feed: The CPU can supply 12 W to the S7-1500 backplane bus.
- Engineering version: Firmware V2.9 is integrated with TIA Portal V17.
- Mounting temperature: Horizontal mounting permits 0 to 60 °C, while vertical mounting permits 0 to 40 °C.