Features:
- Sixteen 0/4 to 20 mA transmitter inputs
- 24 V DC transmitter supply for two-wire or four-wire circuits
- Channel limits and signal supervision for redundant operation
Siemens 6DP1230-7AA receives sixteen current signals from two-wire or four-wire transmitter circuits and prepares them in the FUM 230 module.
The 24 V DC transmitter supply supports the connected circuit, while signal correction applies to the measured values in 6DP1230-7AA.
Four limit values per channel accompany monitoring of transmitter supply, overrange, underrange, and wire break.
The Siemens 6DP1230-7AA FUM 230 Analog Signal-Conditioning Module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6DP1230-7AA FUM 230 Analog Signal-Conditioning Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Input Circuit Choices
- Inputs: Sixteen 0/4 to 20 mA channels are provided.
- Wiring: Two-wire and four-wire connections are supported.
- Correction: Measured values can be corrected.
Transmitter Supply
- Feed: 24 V DC is supplied to connected transmitters.
- Path: The input side receives the current signal.
- Circuit: Supply and signal are handled by the module.
Channel Supervision
- Limits: Four limit values apply per channel.
- Supply: Transmitter supply is monitored.
- Signal faults: Overrange, underrange, and wire break are monitored.
Redundant Arrangement
- Operation: 6DP1230-7AA is suitable for redundancy.
- Signals: Inputs remain 0/4 to 20 mA.
- Module role: FUM 230 conditions transmitter signals.