• Please try to be as accurate as possible with your search.
  • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
  • We can't find any results for “”.
    SEE MORE
      SEE PRODUCTS IN SEARCH PAGE ()
      sales1@apterpower.com
      +86 181 0690 9650
      Request a

      Fast Quote

      Manufacturers
      ALL MANUFACTURERS
      • Please try to be as accurate as possible with your search.
      • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
      • We can't find any results for “”.
        Manufacturers
        sales1@apterpower.com +86 181 0690 9650
        Choose a manufacturer
        ALL MANUFACTURERS
        Vibro-Meter VM600-CPU-M-200-595-033-111
        Vibro-Meter VM600-CPU-M-200-595-033-111
        Vibro-Meter VM600-CPU-M-200-595-033-111
        Vibro-Meter VM600-CPU-M-200-595-033-111
        Vibro-Meter VM600-CPU-M-200-595-033-111
        Vibro-Meter VM600-CPU-M-200-595-033-111
        Ask our team:
        • Phone: +86 181 0690 9650
        • E-Mail sales1@apterpower.com

        VM600-CPU-M-200-595-033-111

        / 4.9
        1001 reviews ｜ Need a Specific Revision?
        The VM600-CPU-M-200-595-033-111 is a Vibro-Meter® CPUM and IOCN modular CPU and I/O card pair, serving as the rack controller and communications interface with support for Modbus RTU/TCP, PROFINET, and a front-panel display.
        In Stock
        Ships by Friday, October 30
        Fast Shipping Available
        Get a quick price for VM600-CPU-M-200-595-033-111
        Quantity
        *E-mail
        Company
        *Mobile
        *Content
        Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
        Get a Quote
        Warranty Policy
        We provide 1 year warranty for all remaining parts.
        The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
        Return Notice
        The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
        In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
        Shipping Mode
        Various transportation options are available in each country. Shipping methods and fees are clearly indicated on all quotations.Various transportation options are available in each country. Shipping methods and fees are clearly indicated on all quotations.
        Parts Availability
        Apter Power offers a wide range of components, products and services related to industrial automation. We also supply new products from a variety of quality manufacturers.
        How to order
        We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online. If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.

        Technical specifications for VM600-CPU-M-200-595-033-111

        • Manufacturer:
          Vibro-Meter
        • Part Number:
          VM600-CPU-M-200-595-033-111
        • Product Family:
          Vibro-Meter
        • Stock:
          3
        • CPU Module Compatibility:
          Fitted to all versions of the CPUM card
        • Processor Type:
          AMD Geode™ LX800
        • Processor Speed:
          500 MHz
        • Memory:
          256 MB DRAM
        • Power Supply (Module Input):
          5 VDC, <1.8 A
        • Power Source:
          VM600 rack power supply
        • Power Consumption (CPUM):
          <10 W
        • Weight:
          0.55 kg
        • Estimated shipping dimensions:
          4x18.6x26.1cm
        • Tariff Code:
          8537101190
        • Country of origin:
          USA
        • Place of shipment:
          Xiamen,Fujian,China
        By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

        More Information

        Overview Manuals Specifications Applications Monitoring & Control Operating Environment

        Features:

        • Unified Rack Management & One-Shot Configuration
        • Dual-Protocol Fieldbus Gateway with Redundant Paths
        • Front-Panel HMI with Rack-Wide Alarm Reset
        The Vibro-Meter VM600-CPU-M-200-595-033-111 centralizes control of all MPC4 and AMC8 protection cards in a VM600 rack. Using VM600 MPSx software over Ethernet or RS-232, you can perform "one-shot" configuration of alarm setpoints, time delays, and measurement scaling across the entire system, drastically reducing setup errors and commissioning time.

        Acting as a data concentrator, this module shares real-time vibration, temperature, and status data with DCS or PLC systems via Modbus RTU, Modbus TCP, or PROFINET. The Vibro-Meter VM600-CPU-M-200-595-033-111 maintains two Ethernet and up to three serial links that can run simultaneously, providing true communication redundancy for critical turbine control loops.

        Operators can scroll through measurement channels using SLOT/OUT keys and view bargraphs with Alert/Danger thresholds directly on the LCD. The ALARM RESET button clears latched alarms for all protection cards at once – a rack-wide equivalent of discrete resets. This reduces panel navigation time during emergency restarts.

        The VM600-CPU-M-200-595-033-111 Vibro-Meter VM600 Series Rack Controller & Communication Gateway may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
        Vibro-Meter VM600-CPU-M-200-595-033-111 VM600 Series Rack Controller & Communication Gateway Manuals,Datasheets,Link Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
        Vibro-Meter VM600-CPU-M-200-595-033-111 VM600 Series Rack Controller & Communication Gateway

        General

        • Manufacturer Vibro-Meter
        • Model VM600-CPU-M-200-595-033-111
        • Condition New Original ready stock
        • Product Family VM600 IOC16T 200-565-000-013,VM600 MPC4 200-510-070-113,VM600 MPC4 200-510-041-021
        Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
        • Gas & Steam Turbine Protection – Used in combined-cycle power plants to monitor shaft vibration, thrust position, and differential expansion. The Vibro-Meter VM600-CPU-M-200-595-033-111 provides real-time alarm aggregation and safe shutdown coordination with the plant DCS.
        • Compressor Trains (Centrifugal & Reciprocating) – Deployed in LNG terminals and gas transmission stations to manage surge monitoring and bearing condition data. Its fieldbus gateway simplifies integration with antisurge controllers.
        • Hydroelectric Turbines – Suitable for low-speed (≤600 RPM) runner monitoring where bearing vibration and cavitation detection require long integration times. The card's hot-swap capability reduces downtime during annual flood-season maintenance.
        • Balance-of-Plant Equipment – Ideal for large cooling tower fans, boiler feed pumps, and induced-draft fans where centralized monitoring of 100+ channels is needed without installing a full CMS separately.
        • Centralized Alarm Management – Aggregates Alert/Danger status from all protection cards and displays overall rack health via front-panel LEDs. Operators can acknowledge and reset latched alarms for the entire turbine train in one action.
        • Fieldbus-Based Setpoint Adjustment – Remote Modbus writes allow authorized personnel to adjust alarm thresholds (e.g., temporary vibration limits during start-up) without opening the cabinet or using a local laptop.
        • Event-Driven Data Logging – Automatically time-stamps and stores configuration changes, card swaps, and exceeded alarm levels. This supports predictive maintenance by identifying repeated pre-alarm events.
        • VME Backplane Control – Directly communicates with MPC4/AMC8 cards via the rack's VME bus, ensuring deterministic response times below 10 ms for protection actions, independent of Ethernet traffic load.
        • Temperature & Ventilation – Designed for -20°C to +65°C ambient. In practice, ensure at least 50 mm clearance above and below the VM600 rack for passive convection; forced cooling is not required but recommended if rack heat load exceeds 80W.
        • Humidity & Conformal Coating – At 0-90% RH non-condensing, standard cards function reliably. For coastal E-house environments (salt spray, condensation cycles), select the "varnished" variant (suffix 33hl) which adds acrylic coating to the PCBA.
        • Electrical Noise Immunity – Certified to IEC 61000-6-2 (industrial heavy immunity). All I/O lines to the IOCN are surge-protected and galvanically isolated (500V DC for RS-485). Maintain separate cable ducts for power and signal wiring to preserve performance.
        • Rack Physical Placement – The Vibro-Meter VM600-CPU-M-200-595-033-111 must be installed in slots 0 (front double-width) with IOCN in rear slot 0. It occupies two front slots and one rear slot; verify available rack positions before ordering, as ABE056 slim racks cannot accept this card.
        Description
        The VM600-CPU-M-200-595-033-111 VM600 modular CPU card is part of the CPUM and IOCN modular card pair that serves as a rack controller and communications interface for the VM600 rack-based machinery protection system (MPS) and condition monitoring system (CMS) from Meggitt’s Vibro-Meter® product line. It acts as both a system controller and a data communications gateway, providing essential control and connectivity functions within the VM600 system.

        The VM600 CPUM/IOCN card pair is designed for use with a VM600 ABE04x system rack. The CPUM card can operate alone or paired with an IOCN card, depending on system requirements. The CPUM is a double-width card occupying two VM600 rack slots, while the IOCN is a single-width card occupying one slot. Installation positions are specific: the CPUM is mounted at the front of the rack (slots 0 and 1), with the associated IOCN installed directly behind it in the rear rack slot (slot 0). Both cards connect directly to the rack’s backplane via two connectors.

        The VM600-CPU-M-200-595-033-111 and its corresponding IOCN card are compatible with all VM600 ABE04x system racks, ensuring flexibility and integration within the Vibro-Meter® VM600 modular monitoring system.
        Alternative Names
        VM600 CPU-M-200-595-033-111 VM600 CPUM 200-595-033-111 VM600 CPU M 200-595-033-111 200-595-033-111 VM600 CPUM VM600 IOC16T 200-565-000-013 VM600 IOC4T 200-560-000-113
        Technical notes
        The Vibro-Meter VM600-CPU-M-200-595-033-111 utilizes an AMD Geode LX800 processor (500MHz) with 256 MB DRAM and requires firmware version 081 or later for full PROFINET support. Always verify the hardware version suffix (e.g., 111 vs 33h) when replacing an existing card to ensure configuration compatibility.
        Exceptional Service

        Our Mission

        • 100% Satisfaction

          We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.

        • Trust Guaranteed

          Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.

        • Expertise

          Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

        FAQS

        The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
        VIEW ALL FAQS
        What is the VM600-CPU-M-200-595-033-111?
        The VM600-CPU-M-200-595-033-111 is a modular CPU card (CPUM) in the VM600 series, part of the CPUM/IOCN card pair. It is used in VM600 rack-based Machinery Protection Systems (MPS) and/or Condition Monitoring Systems (CMS) from Meggitt’s Vibro-Meter® product line, serving as a system controller and data communications gateway.
        What is the function of the VM600 CPUM/IOCN card pair?
        The CPUM/IOCN card pair acts as a rack controller and communication interface for the VM600 system. The CPUM can be used alone or paired with an IOCN card, depending on application and system requirements.
        What fieldbus protocols does the Vibro-Meter VM600-CPU-M-200-595-033-111 support for DCS integration?
        It supports Modbus RTU (serial), Modbus TCP (Ethernet), and PROFINET (firmware version 081 or later). You can run Modbus TCP and PROFINET simultaneously over the two redundant Ethernet ports.
        Can the Vibro-Meter VM600-CPU-M-200-595-033-111 manage XMV16 condition monitoring cards?
        Yes, it manages configuration of XMV16/XIO16T card pairs via an internal Ethernet link, eliminating the need for a separate VibroSight server in certain applications – though measurement data processing remains local.
        How do I verify that the Vibro-Meter VM600-CPU-M-200-595-033-111 is compatible with my existing VM600 rack?
        The card fits any VM600 ABE04x series rack (6U). Check your IOCN card pairing: the CPUm occupies front slots 0-1 (double-width) and the IOCN occupies rear slot 0. Use the MPSx software to compare firmware versions before hot-swapping.
        What environmental limits apply to the Vibro-Meter VM600-CPU-M-200-595-033-111?
        Operating range is -20°C to +65°C at 0-90% RH non-condensing. For coastal or high-humidity environments, order the “varnished” conformal-coated version (suffix 33hl). It is not ATEX certified for hazardous areas – install only in control room or protected cabinets.

        You May Also Like

        Product Browsing History

        Vibro-Meter VM600-CPU-M-200-595-033-111
        Vibro-Meter VM600-CPU-M-200-595-033-111
        Vibro-Meter VM600-CPU-M-200-595-033-111
        Vibro-Meter VM600-CPU-M-200-595-033-111
        Vibro-Meter VM600-CPU-M-200-595-033-111
        Vibro-Meter VM600-CPU-M-200-595-033-111