Features:
- Direct Drop-In Replacement for Legacy Systems
- AC Power with Included External Adapter
- Industrial Protection (IP65 Front Panel)
The XYCOM 9960 is designed to replace a failed or aging unit on existing industrial equipment without requiring programming changes or cabinet re-wiring. It maintains the same form, fit, and functional interface as originally installed, significantly reducing downtime compared to migrating to a modern HMI platform.
Unlike field-wired 24V DC versions, the XYCOM 9960 units we supply are the AC-powered configuration, each coming with its original power adapter (models 1732RAEC / LPT62). This allows you to power the terminal from standard 100-250V AC wall outlets, avoiding the need to pull new DC lines from a control cabinet.
The front panel of the XYCOM 9960 is rated IP65, providing effective protection against dust ingress and low-pressure water jets from any direction. This makes the XYCOM 9960 suitable for food processing, automotive assembly lines, or machine tool floors where regular wash-downs or airborne particulates would damage standard commercial displays.
The 9960 XYCOM Industrial Operator Interface Terminal may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
XYCOM 9960 Industrial Operator Interface Terminal Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
XYCOM 9960 Industrial Operator Interface Terminal
General
- Manufacturer XYCOM
- Model 9960
- Condition New Original ready stock
- Product Family 9000-EXF,XVME-531,XVME-976
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Discontinued product status – The XYCOM 9960 is no longer manufactured or actively supported by XYCOM/Schneider Electric. It is offered as a tested-working legacy unit.
- No active certifications – Original safety certifications (e.g., CE, UL, CSA) are not available from the current brand owner. Buyers must perform their own compliance assessment for their target market.
- Industrial electrical safety (assumed) – Based on its era of production, the XYCOM 9960 was likely designed to meet basic low-voltage and EMC immunity standards for industrial equipment, but no documents are available.
- User responsibility – Installation must follow local electrical codes. The included power adapter provides basic isolation from mains voltage, but the integrator is responsible for proper grounding and overcurrent protection.
- Ambient temperature range – The XYCOM 9960 is verified to operate between -10°C and +55°C, suitable for unclimate-controlled factory floors.
- IP65 front panel protection – Resists dust ingress and low-pressure water jets, allowing use in areas with airborne particulate or periodic cleaning routines.
- Panel-mount requirement – The rear housing is not sealed; the XYCOM 9960 must be mounted such that its back is enclosed within a control cabinet or dry enclosure.
- AC power dependency – Requires an external adapter (models 1732RAEC / LPT62) connected to 100-250V AC; not a 24V DC field-wired device.
- Legacy automotive assembly lines – Replaces failed operator terminals on transfer lines, torque stations, and part tracking systems without reprogramming.
- Injection molding machines – Provides start/stop, temperature monitoring, and alarm acknowledgment interfaces for older presses originally equipped with XYCOM.
- CNC machine tools – Serves as a pendant or panel-mounted operator panel for lathes, mills, and grinders running legacy controllers.
- Food processing stations – With its IP65 front panel, the XYCOM 9960 can be installed on wash-down capable equipment such as fillers, sealers, and conveyors.