Features:
- Adds an external floppy drive to compatible Xycom industrial computers.
- Mounts at the rear using four drive holes and one separate cable-clamp position.
- Carries the official Xycom Automation spare-part number 116074-001.
Xycom 9000-EXF 116074-001 supplies removable floppy media access when the target computer has no internal drive.
Mechanical placement and cable reach are checked together because the drive connector and clamp define the usable mounting path.
The drive is attached with no diskette inserted to protect the media during installation.
The Xycom 9000-EXF 116074-001 External Floppy Drive Kit is listed as Discontinued / Obsolete by OEM; Apter Power can assist with exact-model documentation and matching.
Xycom 9000-EXF 116074-001 External Floppy Drive Kit Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Drive and clamp positions
- Drive holes: Four holes secure the external floppy at the rear.
- Clamp hole: A fifth screw position secures the cable clamp.
- Location: The drive sits on the back of the computer module.
- Order: Cable reach is checked before committing the mounting position.
Connection path to the computer
- Destination: The cable terminates at the external-floppy connector.
- Reach: The selected location must stay within cable length.
- Support: The clamp prevents the cable from hanging at the connector.
- Boundary: The manual does not treat front and rear kits as the same assembly.
Protecting the diskette during installation
- Before mounting: Remove any diskette from the drive.
- Risk: Mechanical attachment with media installed can corrupt the diskette.
- After mounting: Insert media only after the drive and cable are secure.
- Identity: The external kit remains 9000-EXF 116074-001, not the front-floppy kit.
External boot and removable-media role
- Recovery: The drive supplies floppy media access for recovery procedures.
- Internal-drive absence: The kit is used when the computer lacks an internal floppy.
- Spare identity: The official part number is 116074-001.
- Compatibility: The exact computer series and connector are confirmed before installation.