Features:
- Adapts legacy CENTUM V net cabling to the field-control-station bus interface.
- Provides paired CPU-L/CPU-R connections for Bus 1 and Bus 2 paths.
- Shows receive and left/right send activity at the module faceplate.
AIP532 adapts the documented V net cabling to the control-station bus interface, providing separate paths for redundant bus communication and processor-side connection.
Incoming and outgoing network signals are routed through the adapter between V net media and the paired CPU-L/CPU-R interfaces. Receive and left/right send indications provide local communication status.
Confirm Style S1, cable type, clamp filters, CPU-L/CPU-R assignment and enable/disable position from the project drawings. Do not substitute a Vnet/IP interface for this legacy adapter without an engineered migration.
Availability is reviewed against the exact AIP532 S1 order identity and requested supply condition; manufacturer lifecycle status: Active / Available from OEM.
Verified resources for Yokogawa AIP532 S1:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The Bus 1 and Bus 2 arrangement supports the redundant control-network architecture used by the related CENTUM field-control hardware.
- The adapter is used when maintaining or renewing a legacy CENTUM cabinet that retains V net 10BASE-5/10BASE-2 cabling and the associated control-unit connection.
- Requires exact Style S1 and V net media matching before replacement.
- Connects legacy CENTUM CS or CENTUM VP equipment over V net.
- Provides dedicated CPU-L and CPU-R processor-side connections.
- Adapts redundant V net cabling to the control-station bus interface.
- Local indicators show receive and left/right transmission activity.
- Separate paths maintain communication across Bus 1 and Bus 2.
- Cable type, clamp filters, and enable position must match project drawings.
- Serves as the control-bus adapter for documented V net interconnections.
- Supports 10BASE-5 and 10BASE-2 V net cabling examples.
- Maintains separate Bus 1 and Bus 2 signal paths.