Features:
- Complete interface package: CI854B and TP854 are supplied under one article identity
- Two network channels: the interface supports documented PROFIBUS DP-V1 integration
- Redundancy option: line-redundant topology can be configured where the approved architecture requires it
ABB CI854BK01 3BSE069449R1 connects an AC 800M controller environment to documented PROFIBUS DP-V1 networks.
The package identity keeps the communication module and baseplate together so hardware scope is clear during procurement and service.
Selection must preserve controller compatibility, topology, channel use, addresses, rate, termination, project configuration, and complete ABB article number.
Apter Power supports document review, quotation, and procurement for the ABB CI854BK01 3BSE069449R1 PROFIBUS DP-V1 Communication Interface.
ABB CI854BK01 3BSE069449R1 PROFIBUS DP-V1 Communication Interface Manuals,Datasheets,Link
Important Notice: No qualified exact-model English PDF is attached. Use the complete product model in every document request.
- DP-V1 interface: the module connects documented field devices to the AC 800M system.
- Two channels: topology planning can separate or coordinate the available network paths.
- Address control: every station identity must remain aligned with the controller project.
- Rate agreement: the bus configuration and connected devices must share a supported transmission setting.
- Line redundancy: the interface supports a documented redundant PROFIBUS arrangement.
- Path evidence: both network routes and terminations should be labelled before service.
- Single-fault test: commissioning should prove the designed response without disrupting the healthy path.
- Boundary: redundant wiring does not replace controller and device configuration checks.
- CI854B module: the communication electronics belong to the complete kit identity.
- TP854 baseplate: receiving must include the documented mounting and connection base.
- Project backup: preserve Control Builder and network settings before hardware work.
- Diagnostic release: verify interface, bus, and device status before process return.
- AC 800M fieldbus integration: connect documented PROFIBUS DP-V1 devices to the controller.
- Redundant bus architecture: implement the approved two-path topology where availability requires it.
- Installed-interface maintenance: replace the exact CI854B/TP854 package while retaining project data.
- Network commissioning: verify addresses, rate, termination, diagnostics, and dependent devices as one controlled task.