Features:
- Handles 4-20 mA and 1-5 VDC analog outputs.
- Provides the previous-generation Harmony Rack analog-output function
- the module interfaces through the Harmony Rack I/O expander-bus architecture.
IMASO11 is the ABB Harmony Rack 14-channel analog output module for 4-20 mA and 1-5 VDC analog outputs.
It interfaces field signals with the Symphony Plus controller architecture and provides the previous-generation Harmony Rack analog-output function.
For IMASO11, confirm the 4-20 mA and 1-5 VDC analog outputs range, termination unit, I/O expander-bus position, function code and field wiring before installation.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for ABB IMASO11:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ABB IMASO11 14-Channel Analog Output Module Specs
General
- ManufacturerABB
- ModelIMASO11
- ConditionNew / Surplus / Refurbished
- Product FamilySymphony Plus / Harmony
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Fourteen analog commands provide continuous setpoints whose configured values are supervised by the controller application.
- Loop behavior should be monitored for saturation, incorrect scaling and abnormal actuator response after module service.
- Trend comparison before and after replacement helps identify polarity, range or termination errors.
- The documented installation uses NTBMA2 termination and the matching Harmony rack cable for field connections.
- Function Code 149 defines the analog-output relationship within the controller application and rack architecture.
- Channel mode, addresses, termination and receiving-device load must match before outputs are enabled.
- Applicable approvals must be confirmed from the exact module label and current ABB documentation.
- Certified installation depends on the rack, enclosure, power supplies and termination hardware remaining within approved conditions.
- Substitution with evolution hardware requires review of diagnostics, configuration and certified assembly details.