Features:
- Complete redundant I/O set: two AO Plus cards and the matching mass terminal block share one code
- Sixteen HART outputs: the assembly handles 4–20 mA channels with HART communication
- HiC marshalling path: the 48-pin interface is defined for Pepperl+Fuchs barrier and termination boards
SE4035S2B5 consolidates the redundant S-series AO electronics and their 48-pin field interface into one orderable assembly.
The sixteen 4–20 mA channels preserve HART access while the two-card structure supports the DeltaV redundant output architecture.
A separate connection-board code means cabinet completeness depends on the selected HiC barrier board, mass cable, and existing carrier arrangement.
Apter Power can review SE4035S2B5 card pair, terminal block, HiC marshalling hardware, condition, and documentation before quotation.
Emerson SE4035S2B5 Redundant 16-Channel HART Analog Output Assembly Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Card quantity: the order code includes two AO Plus cards.
- Output count: sixteen channels are provided.
- Signal standard: each channel uses 4–20 mA with HART.
- Terminal hardware: a redundant 48-pin AO mass terminal block is included.
- Barrier family: the mass block is intended for Pepperl+Fuchs HiC IS barriers.
- Termination boards: the associated HiC board forms the field marshalling layer.
- Mass connection: the 48-pin interface carries the grouped analog-output wiring.
- Board boundary: the 16-channel analog mass connection board is not part of this code.
- Dual electronics: both AO Plus cards belong to the ordered assembly.
- Field continuity: terminal and barrier wiring must follow the installed redundancy design.
- HART path: asset communication depends on channel and marshalling configuration.
- Cabinet record: capture carrier, card positions, cable IDs, barrier board, and terminal-block identity.
- Redundant process-control outputs: drive sixteen 4–20 mA HART field loops from DeltaV S-series I/O.
- Intrinsic-safety marshalling: connect outputs through the specified Pepperl+Fuchs HiC barrier platform.
- HART device integration: retain digital device information over the analog-output wiring path.
- S-series cabinet modernization: replace the two-card and terminal-block set while retaining a documented barrier arrangement.