Features:
- Provides the Symphony Plus interface path between INFI-Net and computer-based supervisory equipment.
- Supports established Harmony communication architecture for control and system-data exchange.
- Has a documented ABB evolution path to the SPIET800 Ethernet computer interface unit.
The current module is SPICT13A, the ABB Symphony Plus INFI-Net-to-computer interface.
It links supervisory computer functions with the distributed control network in installed Harmony systems.
Before replacement, confirm the complete code, node arrangement, companion interface hardware, cabling, software level, and whether an SPIET800 migration is planned.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for ABB SPICT13A:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Connects supervisory computer functions to legacy INFI-Net control networks.
- Supports maintenance and lifecycle planning for installed Symphony Plus and Harmony communication nodes.
- Provides an engineering reference point for migration from an INFI-Net computer interface to an Ethernet CIU architecture.
- Links the INFI-Net control network with computer-based supervisory equipment.
- Exchanges control, status, and system information through the established computer-interface path.
- Operates as part of the Harmony node communication architecture rather than as a standalone Ethernet gateway.
- Supports installed Symphony Plus and Harmony systems that use the INFI-Net network family.
- Has remained in ABB’s Classic lifecycle phase since 2013 for supported legacy installations.
- Uses SPIET800 as the documented Ethernet CIU evolution path when an engineered migration is required.
- Requires confirmation of the complete module code and the installed INFI-Net node architecture.
- Must match the existing companion interface, termination, cabinet cabling, and software arrangement.
- Needs a planned network, software, and outage review before conversion to the SPIET800 Ethernet architecture.