Features:
- MPS III power-supply product ID
- Four regulated DC output rails
- Harmony modular power-system application
PHARPS32000000 supplies the documented logic and field-power rails required by its MPS III installation.
The complete system may use monitoring, load sharing, and redundancy, but those functions depend on the surrounding chassis and power arrangement.
A replacement decision should connect the exact product ID with output wiring, tray position, monitoring indications, and the site's redundancy design.
Availability is subject to Apter Power's current inventory and sourcing confirmation.
ABB PHARPS32000000 MPS III Power Supply Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ABB PHARPS32000000 MPS III Power Supply Specs
General
- ManufacturerABB
- ModelPHARPS32000000
- ConditionNew Original ready stock
- Product FamilyHarmony MPS III Power System
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Documented DC outputs
- 5 V rail: Rated at 60 A.
- +15 V rail: Rated at 3 A.
- -15 V rail: Rated at 3 A.
- 24 V rail: Rated at 17 A.
Assembly review
- Product ID: Match PHARPS32000000 character by character.
- Tray position: Record the installed location and connections.
- Monitoring: Capture power-system status before removal.
- Related item: Do not confuse PHARPS03000000 with this multi-rail supply.
System-level checks
- Architecture: Confirm the documented MPS III redundancy scheme.
- Load sharing: Review all installed supplies as one configured system.
- Online work: Use only the ABB procedure applicable to the assembly.
- Acceptance: Validate output and monitoring status before production release.