Discover how Apter Power helps customers source hard-to-find automation parts,overcome delivery challenges and keep production moving.VIEW OUR SUCCESS STORIES >>
Technical specifications for FECA-01
Manufacturer:
ABB
Part Number:
FECA-01
Product Family:
ABB Drives
Installation:
Into the option slot on the drive
Degree of protection:
IP20
Indicators:
Two green LEDs and one bicolor
LED:
LINK/ACT, LINK/ACT and STATUS
Connectors:
20-pin connector to the drive (X3), Two 8P8C modular jacks (X1 and X2)
Power supply:
+3.3 V +5% max. 450 mA (supplied by the drive)
General:
Complies with EMC standard EN 61800-3:2004, Printed circuit board conformal coated
Compatible devices:
All EtherCAT-compliant devices
Termination:
Internal
Wiring:
Cat 5e FTP1) or STP1) (UTP)
Connector:
8P8C modular jack (RJ-45)
Maximum segment length:
100 m
Topology:
Daisy chain
Transfer rate:
100 Mbit/s
Serial communication type:
Full duplex
Protocol:
EtherCAT
Weight:
0.45 kg
Estimated shipping dimensions:
8.13x5x6.35cm
Tariff Code:
8537101190
Country of origin:
Sweden
Place of shipment:
Xiamen, Fujian, China
By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.
The ABB FECA-01 EtherCAT® Adapter Module is an optional module designed to integrate ABB drives into EtherCAT networks, providing reliable, high-speed communication. By using this module, operators can send control commands such as Start, Stop, and Run Enable, feed motor speed, torque, or position references, and manage process values within the drive's PID controller.
It also enables real-time monitoring, including reading status information, actual drive values, and the ability to reset faults remotely. Installation is simple, as the FECA-01 mounts directly into an option slot on the drive’s motor control board. Classified as a complex slave device, it supports daisy-chain topologies for multiple devices with maximum segment lengths of 100 m.
Equipped with two green LEDs and one bicolor LED, the module provides visual feedback for LINK/ACT and STATUS. It supports standard Cat 5e or STP cabling and operates at a transfer rate of 100 Mbit/s in full-duplex mode, fully compatible with all EtherCAT-compliant devices. The printed circuit board is conformal coated and complies with EMC standard EN 61800-3:2004.
With the FECA-01, ABB drives gain enhanced network connectivity, flexible control, and secure communication, making it ideal for modern automation systems requiring precise drive management and EtherCAT integration.
We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
Trust Guaranteed
Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.
Expertise
Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.
FAQS
The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.