Features:
- Encoder inputs: 2 TTL encoder connections
- Commutation / PTC: Supported on one encoder connection
- Emulation output: TTL encoder
The current model is FEN-01; the cited ABB manual does not establish 68679273 as the exact public order code, so it is not used as the product identifier.
The module provides two TTL encoder connections, one supporting commutation signals and PTC input, together with TTL encoder emulation and two latch inputs.
Confirm drive support, encoder signal format, selected +5.5 V or +24 V supply and terminal assignment before installation.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for ABB FEN-01:
- TTL encoder feedback for supported ABB drives.
- Applications requiring encoder emulation output.
- Feedback installations using the documented digital latch inputs or commutation signals.
- Drive support: Confirm FEN-01 support for the exact ABB drive and firmware.
- Encoder type: Use a TTL encoder compatible with the interface specification.
- Signal options: Check whether commutation signals and the PTC input are required.
- Dimensions: The manual drawing gives 63 x 106 x 26/31 mm.
- Supply selection: Set the encoder supply to +5.5 V or +24 V as required.
- Wiring: Follow the terminal and shielding instructions in the FEN-01 manual.
- Feedback check: Verify encoder direction and signal quality during commissioning.
- Latch inputs: Test each configured digital latch input.
- Emulation: Confirm the receiving device reads the TTL emulation output correctly.