Features:
- The kit combines an FS450R17KE3 IGBT power module with AGDR-81C gate-driver hardware.
- Its semiconductor stage is rated at 1700 V and 450 A in an ECONO+ package.
- ABB requires new IGBT control ribbon cables when this service kit is installed.
ABB FS450R17KE3/AGDR-81C 3AUA0000109339 restores the documented IGBT and gate-driver assembly used in selected ACS800 drive modules as one coordinated spare-part kit.
The IGBT carries the switched power, while the AGDR-81C board applies the gate commands that control the semiconductor module.
Ribbon-cable selection follows the installed ACS800 frame and IGBT arrangement, so the module nameplate and existing drive configuration must be checked before service.
The ABB FS450R17KE3/AGDR-81C 3AUA0000109339 IGBT/AGDR Spare-Part Kit may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
ABB FS450R17KE3/AGDR-81C 3AUA0000109339 IGBT/AGDR Spare-Part Kit Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Power and gate-drive parts
- IGBT stage: The FS450R17KE3 module carries the switched power path in the ACS800 drive module.
- Driver stage: The AGDR-81C board generates the gate commands used by the IGBT module.
- Service identity: Both parts are specified together under FS450R17KE3/AGDR-81C 3AUA0000109339 and should be checked as one kit.
- Package format: The semiconductor uses the ECONO+ package documented for the 1700 V, 450 A assembly.
How the power rating applies
- Blocking voltage: For FS450R17KE3/AGDR-81C 3AUA0000109339, the 1700 V rating applies to the IGBT power device within the kit.
- Current rating: The 450 A value describes the rated IGBT module current, not the gate-driver control circuit.
- Gate command: The AGDR-81C board controls IGBT switching and remains electrically distinct from the main power path.
- Drive context: Final operating limits remain governed by the complete ACS800 drive-module design and its installed configuration.
Revision and kit matching
- Documented change: FS450R17KE3/AGDR-81C fully replaces the earlier FS450R17KE3/AGDR-71C combination.
- Complete code: Use the full FS450R17KE3/AGDR-81C 3AUA0000109339 identity rather than matching only the IGBT base number.
- Installed hardware: Confirm the ACS800 frame and number of IGBT modules before selecting associated service parts.
- New product ID: ABB lists 68569591 as the replacement product identity for this spare-part kit.
Control-cable selection
- Replacement rule: For FS450R17KE3/AGDR-81C 3AUA0000109339, ABB directs technicians to install new IGBT control ribbon cables with new IGBT modules.
- Frame dependency: The cable order number changes between ACS800 R7 and R8 drive-module arrangements.
- Module count: R8 multidrive codes also depend on whether the module uses two or three IGBT assemblies.
- Service record: Record the installed drive frame and cable code before removing the original power-stage wiring.