Features:
- Option 728-1 configuration: ABB documents the DSQC 634 as an optional controller power supply.
- Specified harness set: The installation uses 3HAC082083-001 and 3HAC082508-001.
- Bracket snap-fit: The unit is pressed into the documented bracket until it clicks.
ABB 3HAC13398-2 provides the DSQC 634 optional power-supply configuration for the OmniCore V400XT controller.
Its bracket snap-fit procedure distinguishes the installation from the screw-mounted DSQC 609 arrangement.
Correct preparation combines the option record, both harnesses, ESD control, the three-minute wait, and post-installation testing.
Availability of 3HAC13398-2 is subject to Apter Power's current inventory and sourcing confirmation.
ABB 3HAC13398-2 DSQC 634 Power Supply Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ABB 3HAC13398-2 DSQC 634 Power Supply Specs
General
- ManufacturerABB
- Model3HAC13398-2
- ConditionNew Original ready stock
- Product FamilyOmniCore V400XT
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Prepare harnesses 3HAC082083-001 and 3HAC082508-001 with the supply.
- Verify both routes against the OmniCore V400XT circuit documentation.
- Confirm option 728-1 before finalizing the retrofit scope.
- Position the DSQC 634 on its assigned bracket.
- Press the unit until the retaining action clicks into place.
- Do not apply the M4 fastener method specified for DSQC 609.
- Apply ESD protection before handling the optional supply.
- Disconnect mains and wait three minutes before cabinet work.
- Restore both harnesses and complete the documented function tests.