Features:
- PROFIBUS device adapter: the card presents IRC5 to an external network controller
- IRC5 computer-unit hardware: ABB shows the adapter with DSQC1000 and DSQC1003
- RobotWare engineering assets: a named GSD and I/O template support configuration
DSQC 667 3HAC026840-001 is ABB's Anybus PROFIBUS device adapter for an IRC5 computer unit.
The page separates physical placement, engineering resources, and the input/output map so each commissioning decision remains traceable.
Network ownership, project recovery, and failure behavior are resolved independently in the engineering guidance below.
Apter Power can review DSQC 667 3HAC026840-001 hardware identity, project context, condition, and official network documentation.
ABB DSQC 667 3HAC026840-001 IRC5 PROFIBUS Anybus Device Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Main computer: ABB documents the adapter with DSQC1000.
- Expansion board: DSQC1003 carries the Anybus device in the illustrated computer unit.
- Adapter identity: the fieldbus card is DSQC 667, article 3HAC026840-001.
- Installation source: ABB directs card replacement work to the IRC5 product manual.
- GSD file: use HMS_1811.gsd for the Anybus interface.
- Device name: the engineering tool displays Anybus-CC PROFIBUS DP-V1.
- I/O template: PB_Internal_Anybus.cfg provides the preconfigured signal names.
- File locations: ABB supplies the template through RobotStudio and the IRC5 controller.
- Default input map: eight digital input bytes start at bit 0.
- Default output map: eight digital output bytes start at bit 0.
- Maximum input map: the documented limit is 64 digital input bytes.
- Maximum output map: the documented limit is 64 digital output bytes.
- IRC5 device integration: expose robot-controller I/O to an existing PROFIBUS controller.
- Legacy cell maintenance: restore a documented DSQC1000 and DSQC1003 Anybus installation.
- Controlled project migration: carry the GSD identity, signal map, and station settings into the replacement project.