Features:
- A five-digit display presents the selected parameter number or value.
- Auto and Hand keys select the documented inverter control mode.
- The panel mounts directly on the drive or through a cabinet-door kit.
Siemens 6SE6400-0BE00-0AA0 brings MICROMASTER 430 parameter access to the inverter face.
Navigation and confirmation keys separate parameter selection from value entry.
The active command source and drive enable conditions determine whether local operating keys are accepted.
The Siemens 6SE6400-0BE00-0AA0 MICROMASTER 430 BOP-2 Basic Operator Panel may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6SE6400-0BE00-0AA0 MICROMASTER 430 BOP-2 Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Parameter Display Path
- Digits: Five display positions present the active parameter or value.
- Selection: Navigation keys move through the parameter structure.
- Entry: The confirmation key accepts the displayed change.
- Check: Identify whether the panel is showing a parameter number, value, or status before editing.
Auto and Hand Operation
- Auto: The drive follows the configured automatic command source.
- Hand: Permitted commands originate from the local keypad.
- Transfer: Changing mode does not bypass drive enable or fault conditions.
- Boundary: The inverter configuration determines which local commands are active.
Local Drive Commands
- Start: The run key requests local operation in the permitted mode.
- Stop: The stop key issues the documented local stop command.
- Direction: Direction selection remains subject to drive settings.
- Frequency: Keypad frequency changes follow the selected parameter and command source.
Panel Installation Options
- Direct: The panel seats on the MICROMASTER 430 operator-panel interface.
- Door kit: A mounting kit moves the keypad to a cabinet door.
- Connection: The interface carries display data, keypad commands, and panel power.
- Handling: Protect the rear connector when the operator panel is removed.