Features:
- Corrected complete catalog: the product model is 3HAC046163-001
- First-axis role: ABB documents the gearbox at the IRB 6700 base drive
- Seal-specific configuration: the official spare table assigns O-ring 3HAB3772-93
3HAC046163-001 is a particular IRB 6700 axis-1 gearbox configuration and must be ordered by its complete three-digit suffix.
Its replacement separates the full arm-and-frame package from the base, making lifting and calibration evidence essential parts of the job record.
No verified exact-product shipping weight or package dimensions were available, so those logistics fields remain intentionally blank.
Apter Power can review 3HAC046163-001 gearbox markings, robot variant, seal requirement, mechanical condition, and official procedure scope.
ABB 3HAC046163-001 IRB 6700 Axis-1 Gearbox Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Exact suffix: use -001 rather than the incomplete -0 form
- Robot range: verify the precise IRB 6700 payload and reach configuration
- Motor generation: identify Type A or Type B before selecting removal tools
- Seal identity: retain O-ring 3HAB3772-93 for this gearbox
- Structure: remove the arm system, frame, and balancing device as a supported package
- Main sling: ABB specifies a 2,000 kg capacity for the documented route
- Gearbox guide: use 3HAC043870-009 on the listed variants
- Final alignment: tool 3HAC046645-003 restores the gearbox-to-frame position
- Pre-work choice: select reference or fine calibration before disassembly
- Reference values: capture them while robot motion is still available
- Fallback: remove DressPack and tools when fine calibration is required
- Completion: restore seals, lubrication, calibration, and the controlled test run
- IRB 6700 base-drive overhaul: replace the documented first-axis gearbox configuration
- Structural robot repair: coordinate arm-system lifting and gearbox separation
- Seal-controlled rebuild: retain the 3HAB3772-93 gearbox-specific O-ring
- Corrected-model sourcing: prevent duplicate or incomplete 3HAC046163-0 records