- Eurocard electronic driver for one proportional-valve solenoid
- Closed-loop control using the valve's position-transducer signal
- Analog reference interface with option-dependent current-signal support
E-ME-T-01H converts an external reference command into regulated current for a compatible Atos proportional valve.
The feedback loop compares command and transducer position so the driver can correct valve-spool movement rather than operate as a simple open-loop amplifier.
The complete option code, valve identity and saved adjustment positions are essential replacement data because reference and feedback interfaces are not universal across the E-ME-T family.
Availability, condition, price, and shipping time for E-ME-T-01H are confirmed during quotation.
Atos E-ME-T-01H Proportional Valve Driver Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Use only with the documented single-solenoid proportional-valve arrangement
- Match the transducer type, feedback range and connector wiring to the installed valve
- Verify command and feedback direction before hydraulic movement is released
- Standard analog reference and option I current-reference versions require different input wiring
- Option C provides a 4–20 mA feedback interface for the compatible transducer circuit
- Read the complete board code before transferring a driver between machines
- Record all potentiometer positions and cabinet wiring before removing the original board
- Establish zero command and stable feedback before increasing the motion range
- Check shielding, supply ripple and valve response if the control loop oscillates
- Closed-loop spool-position control for Atos proportional directional valves
- Analog hydraulic control in industrial machine and process equipment
- Eurocard replacement in legacy Atos proportional-valve control cabinets