Features:
- The controller type is Digital axis motion controller.
- Control modes is set to Position and alternate force/pressure.
- The module's supply is 24 VDC.
Z-ME-KZ-PS combines controller type of Digital axis motion controller, control modes of Position and alternate force/pressure, and supply of 24 VDC in the Z-ME Axis Controllers platform.
It controls electrohydraulic position, velocity and force using proportional valves and feedback transducers. This role connects the Digital Axis Motion Controller to the surrounding Z-ME Axis Controllers architecture.
Before commissioning, do not assign CANopen or Profibus features to the base PS suffix; match the feedback transducer and analog signal type; and preserve axis parameters before changing the controller.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for ATOS Z-ME-KZ-PS:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Closes electrohydraulic position loops for proportional directional valves.
- Coordinates motion where force or pressure limiting must alternate with position control.
- Fits modular Eurocard control racks used in presses, forming machines and hydraulic test systems.
- The applicable value for programming interface is RS-232 via DB9.
- The base PS suffix does not include a fieldbus interface.
- Do not assign CANopen or Profibus features to the base PS suffix.
- The configured value for software is ATOS Z-SW.
- Position reference can be selected from an internal or external source.
- Before work begins, personnel must preserve axis parameters before changing the controller.
- The requirement for feedback corresponds to potentiometer and supported analog transducers.
- This assembly specifies ±10 VDC or 4-20 mA where configured for analog signals.
- A value of proportional directional valve command applies to valve interface.