Features:
- Uses a 25 mm bore double-acting mechanism to generate the gripper's linear jaw motion.
- Moves both jaws in parallel on the integrated guide for repeatable part handling.
- Includes a built-in magnet that enables optional position sensing with a compatible switch.
The current ordering configuration is HFZ25, the HFZ Series Double-Acting Parallel Air Gripper documented by AirTAC for AirTAC HFZ Air Grippers.
HFZ25 is used in Pick-and-place stations that need compact parallel gripping motion. Its system role and configuration limits must remain aligned with the official specification.
Before commissioning HFZ25, verify the installed assembly, project wiring, power, software and environmental conditions that apply to this exact part number.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for AirTAC HFZ25:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Pick-and-place stations that need compact parallel gripping motion.
- Machine-tending fixtures requiring repeatable jaw alignment after maintenance.
- Assembly equipment where optional magnetic sensing confirms open or closed travel.
- Size effective gripping force at the actual jaw overhang and operating pressure.
- Apply the AirTAC safety-factor method for the workpiece mass and friction.
- Keep external jaw loads within the HFZ selection guidance.
- Use the body mounting holes and locating references for repeatable alignment.
- Attach custom fingers without disturbing the guide-body positioning pin.
- Route air tubing and optional sensor cable clear of jaw travel.
- Order HFZ25 for double-acting operation and a 25 mm bore.
- Select the required finger and mounting option from the ordering code.
- Choose the magnetic sensor separately for the intended control voltage and mounting slot.