Features:
- Connects an M-series controller to a PROFIBUS DP fieldbus segment for cyclic device-data exchange.
- Belongs to the earlier Series 2 Plus generation of DeltaV PROFIBUS interface cards.
- Supports existing simplex installations and the specified redundant PROFIBUS service arrangement.
VE4022 KJ3243X1-BB1 links an existing PROFIBUS device segment to the DeltaV controller environment.
Network operation depends on the interface hardware, retained device definitions, bus addressing, and the installed segment configuration.
For replacement planning, record both card positions in redundant service and verify the installed DeltaV release before selecting a newer BB3 migration path.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson VE4022 KJ3243X1-BB1:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Connect the interface only to the specified PROFIBUS DP segment and compatible DeltaV M-series carrier.
- Preserve the installed device addresses, baud rate, and termination settings across the complete bus segment.
- Validate controller database mapping and field-device configuration before restoring the interface to process service.
- Confirm the installed DeltaV release before planning migration from the BB1 Series 2 Plus interface.
- The newer BB3 replacement requires its specified software baseline and cannot form an unrestricted mixed-generation pair.
- Retain the controller database and all PROFIBUS device definitions throughout the planned migration sequence.
- Record both installed interface-card ordering codes before beginning work on a redundant PROFIBUS pair.
- Avoid permanent redundant operation that combines a BB1 or BB2 card with the newer BB3 generation.
- Replace both cards under the defined migration plan while preserving the surviving network configuration.
- Connect DeltaV M-series controllers to PROFIBUS DP instruments, drives, or remote I/O devices.
- Maintain installed Series 2 Plus fieldbus segments during legacy interface-card service.
- Support controlled migration to a matched newer interface pair when the software and network design are verified.