Features:
- Combines copper and dual fiber ports enabling flexible EtherNet/IP network topology configuration.
- Supports high-speed ring communication with less than 3 ms make/break time and integrated diagnostic capability.
- Includes IEEE 1588 PTP and QoS functions for synchronized and prioritized industrial network data transmission.
Allen Bradley EtherNet/IP tap 1783-ETAP2F is designed for structured industrial Ethernet communication systems requiring both copper and fiber connectivity. It integrates one copper port and two fiber ports to support EtherNet/IP network architecture under defined electrical and optical parameters. The device operates on 24V DC supply with controlled power consumption and isolation characteristics. The Allen Bradley EtherNet/IP tap 1783-ETAP2F maintains standardized electrical and communication configurations across network layers. It is designed for use in structured communication environments requiring stable signal transmission.
In system configuration, Allen Bradley EtherNet/IP tap 1783-ETAP2F supports linear and device level ring (DLR) topology options. It enables fast recovery communication behavior with defined performance characteristics under ring operation. The device includes diagnostic capability to support structured network monitoring functions. Fiber communication is based on 100Base-FX standard with defined wavelength and sensitivity range. The Allen Bradley EtherNet/IP tap 1783-ETAP2F maintains controlled optical and electrical integration within EtherNet/IP systems.
From a communication architecture perspective, Allen Bradley EtherNet/IP tap 1783-ETAP2F supports IEEE 1588 synchronization and QoS data prioritization functions. It ensures structured data transmission across multiple network nodes with standardized interoperability support. Environmental resistance includes defined operating temperature, humidity, vibration, and shock limits. Electrical installation follows specified wiring and torque requirements for consistent connection integrity. The Allen Bradley EtherNet/IP tap 1783-ETAP2F provides structured network connectivity within industrial Ethernet systems.
The 1783-ETAP2F Allen-Bradley 1+2 Port EtherNet/IP Taps may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Allen-Bradley 1783-ETAP2F 1+2 Port EtherNet/IP Taps Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Allen-Bradley 1783-ETAP2F 1+2 Port EtherNet/IP Taps Specs
General
- Manufacturer Allen-Bradley
- Model 1783-ETAP2F
- Condition New Original ready stock
- Product Family 1783-ETAP3T,1783-ETAP,1783-ETAP1F
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Status Indication: Real-time monitoring of module operation, ring network integrity, and port connection status via OK, Link, and Network status LEDs on the panel.
- Fault Warning: When a partial fault is detected, the module automatically adjusts the LNK indicator and prevents the last active port from being disabled to maintain basic communication.
- Debugging Mode: The device port debugging mode can be enabled via RSLinx software, allowing technicians to directly analyze traffic and troubleshoot locally accessed devices.
- Management Interface: A built-in web interface allows users to remotely view statistics, port attributes, and network configurations, improving maintenance efficiency.
- Hardware DIP Switches: Operating modes can be quickly set via DIP switches on the side of the module, such as enabling or disabling the Ring Supervisor function.
- IP Assignment: Supports IP address assignment via BootP/DHCP or static settings to meet the needs of different network management strategies.
- Software Integration: Add-on Profiles (AOPs) can be downloaded and configured in the Studio 5000 environment for seamless integration with the Logix control system.
- Factory Reset: Supports quick factory reset via specific switch combinations, resetting IP addresses to default values for easy device redeployment.
- DLR Ring Network Access: Securely connects individual devices (such as frequency converters or I/O modules) that do not support embedded switching technology to a Device-Level Ring Network (DLR) to achieve network redundancy.
- Optical-to-Electronic Media Conversion: Utilizes its two fiber optic ports to bridge long-distance, highly interference-resistant fiber optic backbone networks with local copper cable devices in industrial environments.
- Topology Expansion: Acts as a node in complex linear or star topologies, enabling flexible expansion of local devices without additional backplanes.
- System Segmentation Isolation: Connects specific control subsystems to existing EtherNet/IP networks via splitters without interrupting main network operation, reducing cabling complexity and cost.