Features:
- RS-232 point-to-point DTAM Micro configuration
- Nonvolatile storage for the communication driver and operator screens
- Host-specific runtime cables for PLC-5, SLC, and MicroLogix paths
2707-M232P3 is the RS-232 catalog in the DTAM Micro pair and is selected as a point-to-point operator station.
The critical recognition boundary is that host identity lives in the stored communication environment as well as in the physical cable.
Runtime cabling, PC transfer, and operator-data functions therefore require separate validation even though they share the same stored project.
Apter Power can coordinate official-document review, quotation, and sourcing support for 2707-M232P3.
2707-M232P3 DTAM Micro RS-232 Operator Interface Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- PLC-5 link: The 2707-NC3 connects the terminal to a configured PLC-5 Channel 0 port.
- SLC serial link: The 1747-CP3 and required gender adapter serve supported SLC 5/03 through 5/05 ports.
- MicroLogix link: The documented MicroLogix cable must be selected instead of reusing a PLC or SLC lead.
- Programming lead: The 2707-NC2 is assigned to application transfer, not machine runtime.
- Software baseline: DPS catalog 2707-NP Series H or later initiates the official transfer workflow.
- Transfer behavior: Upload and download occur at the documented fixed transfer rate before runtime settings resume.
- Screen storage: Nonvolatile memory retains the driver, configuration, and approximately 244 user screens.
- Recipe operation: Linked recipe screens can write approved blocks of controller data.
- Point access: Operators can monitor or modify configured PLC or SLC data during setup and production.
- PLC-5 local access: Connect directly to a configured Channel 0 serial port for process-data work.
- SLC serial operation: Provide a local interface for supported SLC 5/03 through 5/05 controller ports.
- MicroLogix display and entry: Use the documented point-to-point path for compact machine-level operator tasks.