Features:
- 5.7-inch QVGA color LCD with an integrated analog resistive touchscreen for compact operator interfaces.
- Ethernet, RS232, dual USB and CompactFlash interfaces support communication, service access and application data handling.
- Metal housing with front-side IP65 protection supports panel-mounted industrial visualization equipment.
The current configuration is a Power Panel PP120 terminal with 64 MB SDRAM, 24 VDC operation and a Type I CompactFlash slot. The required 24 VDC connector is ordered separately as either a screw-clamp or cage-clamp version.
The terminal is designed for operator visualization and control within B&R automation installations. Ethernet, serial and USB interfaces provide practical access for controller communication, maintenance devices and service media.
When selecting or replacing the unit, verify the panel cut-out, project compatibility, connector accessory and wiring arrangement. The RS232 and other interfaces are not galvanically isolated, so cabinet grounding and signal routing should be checked before commissioning.
Availability: Configuration and lifecycle should be verified against the current inventory and B&R documentation before ordering.
Verified resources for B&R 4PP120.0571-21:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Machine operator stations requiring touch-based visualization and local control of automation processes.
- Panel-mounted automation cabinets using Ethernet, RS232, USB and CompactFlash service interfaces.
- Legacy B&R Power Panel installations requiring a compact 5.7-inch industrial operator terminal.
- The Ethernet interface provides 10/100 Mbit/s network communication for controller and service connectivity.
- The RS232 port uses a 9-pin DSUB connection for serial equipment and modem-capable communication tasks.
- Two USB 1.1 Type A ports support low- and full-speed peripheral devices with up to 500 mA per connection.
- The front panel is rated IP65 and NEMA Type 4X for protected industrial cabinet installations.
- The rear side is rated IP20 when the CompactFlash card is correctly installed in the slot.
- The metal housing, polyester overlay and flat gasket support the specified panel-mount construction.
- The Geode SC2200 controller operates at 266 MHz and includes floating-point support for terminal processing tasks.
- The 64 MB SDRAM, shared graphics memory and firmware flash provide the memory structure used by the operator terminal.
- Typical consumption is 10 W and maximum consumption is 15 W, with passive heat dissipation and no active fan.