Features:
- Provides embedded control processing for Nexus OnCore applications.
- Runs assigned project logic and associated communication services.
- Requires matching firmware and application files for the installed system.
MPU55 combines controller role of Universal Nexus control platform, execution of Runs application code, and firmware role of Function depends on loaded controller firmware in the Nexus OnCore platform.
It runs application code as an integrated stand-alone controller for the Nexus system. This role connects the Nexus OnCore Controller Module to the surrounding Nexus OnCore architecture.
Before commissioning, match project firmware and application files; verify the complete MPU55 regional suffix; and maintain enclosure, grounding, and 24 VDC power requirements.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for General Electric MPU55:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Executes configured process-control applications within a Nexus OnCore control system.
- Provides the controller platform used by supported OnCore I/O and protection modules.
- Supports certified industrial panel installations located in approved hazardous areas.
- Accepts regulated 24 VDC operating power from the Nexus OnCore panel supply.
- Draws no more than 7.2 W under the specified controller configuration and service conditions.
- Executes the configured application through an integrated stand-alone computer subsystem.
- Supports rated ambient operation throughout the specified range from -20 to +50 degrees C.
- Includes Class I Division 2 and Zone 2 markings for the approved hazardous locations.
- Requires installation inside a suitable panel enclosure that maintains the stated environmental conditions.
- Match the project firmware and application files before installing or commissioning the controller.
- Verify the complete regional part-number suffix against the controller fitted in the existing system.
- Maintain the required enclosure, grounding, and regulated 24 VDC power provisions during installation.