Features:
- Multiple-approval 3300 XL 8 mm probe with a 1.0 m cable is installed.
- A 16.5 in penetration reaches deep machine-case measurement points.
- Two 3/4-14 NPT fittings and one plug support the English conduit pattern.
The dual-fitting configuration is intended for long-reach installations that need a defined conduit entry arrangement.
The housing allows the probe and cable to remain serviceable from outside the machine casing.
Check the sleeve, casing, barrier and routing requirements before applying the published retaining torque.
The 31000-28-10-00-165-02-02 is supplied with the English two-fitting option.
Verified resources for Bently Nevada 31000-28-10-00-165-02-02:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Deep radial vibration sensing inside large machine casings.
- Externally serviceable Keyphasor installations with dual conduit entry.
- Condition-monitoring maintenance points where probe removal must avoid casing disassembly.
- The installed 3300 XL 8 mm probe is rated for -51°C to +177°C operating and storage conditions.
- The housing material is glass-reinforced PPS thermoplastic with conductive fibers.
- Short hot-water or condensing-steam exposure is subject to the published qualification limits.
- External access permits probe-gap checks while the machine remains assembled.
- The assembly supports radial vibration or Keyphasor transducer layouts.
- Probe leakage and containment responsibilities remain with the installation owner.
- The housing complies with API 670 for externally mounted proximity probe housings.
- Mechanical protection is certified to NEMA 4X and verified to IP66.
- The multiple-approval probe option must be matched to the site approval requirements.