Features:
- 3.9-inch unthreaded length with 6.3-inch overall case provides extended reach for deep-well mounting through thick casings.
- FluidLoc cable technology blocks oil migration through the cable interior, eliminating field sealing in lubricated machinery.
- CSA, ATEX, and IECEx approvals enable global hazardous area deployment without region-specific variants.
The 330101-39-63-10-12-05 reaches through thick casings with its 3.9-inch unthreaded section. Thread the 3/8-24 UNF mount until the shoulder seats, and the unthreaded span does the rest. No standoffs, no custom adapters—just a clean installation that reaches the target.
FluidLoc technology is built into the cable, not added in the field. The internal barrier stops oil from wicking through and leaking at the penetration point. For lubricated machinery, this built-in protection removes a common failure point and simplifies installation.
CSA, ATEX, and IECEx approvals cover North America, Europe, and international markets. One part number serves refineries in Texas, chemical plants in Germany, and offshore platforms in the North Sea—simplifying procurement and reducing spare parts inventory.
The 330101-39-63-10-12-05 Bently Nevada 3300 XL 8 mm Proximity Probes may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330101-39-63-10-12-05 3300 XL 8 mm Proximity Probes Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
Bently Nevada 330101-39-63-10-12-05 3300 XL 8 mm Proximity Probes Specs
General
- Manufacturer GE / Bently Nevada
- Model 330101-39-63-10-12-05
- Condition New Original ready stock
- Product Family
330101-39-63-10-01-05,330101-39-63-10-11-05,330101-39-63-10-12-00
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Oil & Gas & Power: Used in steam turbines, gas turbines, centrifugal compressors, pumps, fans, and generators.
- Radial Vibration Monitoring: Detects relative vibration between shafts and bearings.
- Axial Displacement Monitoring: Measures the longitudinal position of rotating shafts to prevent collisions between moving and stationary parts.
- Keyphasor® Speed Measurement: Serves as a collector for speed and phase reference signals.
- Precise Signal Conversion: Standard Average Scale Factor (ASF) of 7.87 V/mm (200 mV/mil), with linear measurement range typically between 0.25 and 2.3 mm.
- TipLoc™ Encapsulation: Utilizes patented TipLoc molding technology to enhance the bond strength between the probe tip and the body, providing greater impact resistance.
- CableLoc™ Design: Offers tensile strength up to 330 N (75 lbf), ensuring a secure connection between the cable and the probe body.
- FluidLoc® Cable: The "12" in the model number indicates that it is equipped with FluidLoc cable, which effectively prevents liquids (such as lubricating oil) from leaking from the inside of the cable to the outside of the machine, improving the overall protection efficiency of the system.
- Confined Space Installation: The 1-meter short cable design is suitable for compact installation environments where the sensor and preamplifier are close together.
- Unarmored Design: This model does not include stainless steel armor, making it suitable for installation in interior spaces with external conduit protection or low risk of physical impact.