Features:
- Armored M10 x 1 probe construction
- 50 mm overall case length
- 1.0 m total probe length
The 330104-00-05-10-01-00 ordering code defines a specific mechanical build within the 3300 XL 8 mm probe family.
Its short metric case and armored lead suit forward-mount installations that require added cable protection and a protected miniature connector.
Match the probe code to the extension cable, Proximitor sensor, system-length target, mounting thread, and approval requirements before replacement.
The Bently Nevada 330104-00-05-10-01-00 3300 XL 8 mm Proximity Probe with Armor is listed as Active / Available from OEM. Contact Apter Power for system matching and quotation.
Bently Nevada 330104-00-05-10-01-00 3300 XL 8 mm Proximity Probe with Armor Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330104-00-05-10-01-00 3300 XL 8 mm Proximity Probe with Armor Specs
General
- Manufacturer Bently Nevada
- Model 330104-00-05-10-01-00
- Condition New and Original
- Product Family 3300 XL 8 mm Proximity Transducer System
Ordering-code construction
- Probe family: Catalog 330104 denotes an M10 x 1 probe supplied with armor.
- Case options: Codes 00 and 05 specify 0 mm unthreaded length and a 50 mm case.
- Lead length: Code 10 specifies a 1.0 m total probe length.
- Connector option: Code 01 supplies a miniature ClickLoc connector and protector.
Transducer-chain requirements
- System length: Combine probe and extension-cable lengths to match the selected Proximitor sensor.
- Calibration target: Published performance is referenced to AISI 4140 steel.
- Interchangeability: Electrical and physical matching still depends on connector, cable length, and system setup.
- Approval code: The final 00 ordering group specifies no agency approval.
Mechanical and cable checks
- Thread engagement: Limit M10 x 1 engagement to the documented 15 mm maximum.
- Torque: Use the recommended mounting torque for the first three probe threads.
- Cable bend: Maintain the minimum cable bend radius and protect the armored lead from crushing.
- Connector care: Keep the ClickLoc connection clean, dry, and mechanically supported.