Features:
- Non-contact 3300 XL 8 mm proximity probe for compatible transducer systems
- Uses the optional FluidLoc cable design to help prevent oil and other liquids from leaking through the cable interior
- Configured with a 220 mm overall case length and a 5.0 m total probe length
The Bently Nevada 330103-00-22-50-12-05 is an M10 × 1 threaded, non-armored 3300 XL 8 mm proximity probe. When used with a compatible 3300 XL Proximitor Sensor as a complete transducer system, the system can measure static position and dynamic vibration.
This 5.0 m probe is designed for use with a 5 m Proximitor Sensor. The probe uses a miniature coaxial, gold-plated ClickLoc connector that requires no special installation or removal tools.
Connector protectors are recommended for increased environmental protection, but option 12 does not include a connector protector. A protector may be supplied separately for field installation.
No product-specific Bently Nevada end-of-life notice has been confirmed for 330103-00-22-50-12-05 Availability should be confirmed at the time of quotation.
Bently Nevada 330103-00-22-50-12-05 3300 XL 8 mm Proximity Probe Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330103-00-22-50-12-05 3300 XL 8 mm Proximity Probe Specs
General
- Manufacturer Bently Nevada
- Model 330103-00-22-50-12-05
- Condition New — subject to verification against the actual item and quotation
- Product Family 3300 XL 8 mm Proximity Transducer System
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Radial Vibration Monitoring:Used as part of a compatible transducer system for radial vibration measurement on fluid-film bearing machines.
- Axial Position Measurement:Used as part of a compatible transducer system for position measurement.
- Keyphasor Phase Reference:Supports Keyphasor reference and speed measurements when used in a properly configured system.
- Matched 5-Meter System:The 5.0 m probe is designed for use with a 5 m Proximitor Sensor.
- Interchangeable Components:3300 XL 8 mm system components support interchangeability without matching or bench-calibrating individual components, subject to the official system configuration and target conditions.
- Backward Integration:3300 XL 8 mm components are physically and electrically interchangeable with non-XL 3300-series 5 mm and 8 mm components. Mixed systems are limited to the non-XL system specifications.
- Agency Approval Option: 05
- Approvals: CSA, ATEX and IECEx
- FCC: Complies with FCC Part 15
- EMC: EMC Directive 2014/30/EU
- EMC Standards: EN 61000-6-2 and EN 61000-6-4
- RoHS: RoHS Directive 2011/65/EU
- China RoHS: EFUP designation of 15 years for associated cables, in accordance with SJ/T 11364-2024
- Functional Safety: SIL 2 with HFT = 0; SIL 3 with HFT = 1
- API Standard: The standard 3300 XL 8 mm 5-metre transducer system complies with API 670 requirements for mechanical configuration, linear range, accuracy and temperature stability
- Hazardous-Area Use: Subject to the applicable approval, installation drawing and conditions of safe use