Fast Quote
- Bently Nevada·
- 3500/22-01-02-00·
- Inspect on site·
Malaysia Customer Collects Bently Nevada 3500/22-01-02-00 After On-Site Inspection
- IndustryFactory maintenance
- CountryMalaysia
- Product3500/22-01-02-00
- Collection date17 October 2026
Published: 17 October 2026 · Written by May · Technically reviewed by Jim
The customer
The customer travelled from Malaysia to Xiamen while factory equipment was stopped and an exact Bently Nevada replacement was needed.
The priority was to see the physical unit, confirm its identifying information and take it back directly instead of adding further remote sourcing delay.
The problem
Equipment downtime was already affecting the customer's factory. A normal remote procurement cycle would have extended the waiting period and increased uncertainty about receiving the correct module.
The customer therefore chose to inspect the available product in person before collection.
What was required
| Required product | Bently Nevada 3500/22-01-02-00 Transient Data Interface |
| Primary objective | Obtain the exact module without adding unnecessary sourcing delay |
| Identity checks | Complete model, order reference and serial identification |
| Physical checks | Exterior condition and packaging reviewed on site |
| Handover | Direct collection after the customer's review |
| Next step | Testing and use in the customer's system the following day |
What Apter Power did
Prepared the exact requested module. The Bently Nevada 3500/22-01-02-00 and its packaging were available for an in-person review in Xiamen.
Supported the customer's own checks. The customer examined and photographed the model, order reference, serial identification, exterior and packaging.
Completed a direct handover. After the review, the customer took the module back for next-day testing and use.
Verification evidence
The visit photographs show the customer checking the module, identifying label and packaging before collection.
| Reviewed on site | Model, order reference, serial identification, exterior condition and packaging |
| Handover evidence | The customer physically handled and recorded the module before direct collection |
| Result boundary | The module was taken for next-day testing and use; no later negative feedback is recorded |
From urgent need to direct collection
- Factory equipment stoppedThe customer needed the exact replacement module quickly.
- Travelled from Malaysia to XiamenAn in-person visit replaced additional remote inspection steps.
- Physical unit reviewedIdentity, exterior and packaging were checked directly.
- Module collectedThe customer took the unit back immediately after the review.
- Next-day readinessThe module could be tested and put into use the following day.
3500/22M product overview
What the customer said
Apter Power responded quickly, prepared the exact module for our on-site review and made us more confident in taking it back for next-day testing and use.
— Visiting representative of the Malaysian factory-maintenance customerIn the words of the person who handled it
The priority was to make the exact unit and its identifying information available for the customer's own review, then complete a direct handover without adding avoidable waiting time.
— May, Managing Director, Apter PowerThe result
The customer collected the Bently Nevada 3500/22-01-02-00 directly after the on-site review. The module could be tested and put into use the following day.
This shortened the replacement path, helped reduce factory downtime, supported continued equipment operation and limited downtime-related losses. No unverified monetary saving is stated.
Parts involved
Bently Nevada 3500/22-01-02-00
Transient Data Interface reviewed and collected during the customer's visit to Xiamen.
Who wrote this, and who checked it
Frequently asked about urgent replacement collection
What should be sent before travelling for collection?
Send the complete model, suffix, quantity and any order-reference, revision or serial requirements so the correct unit can be prepared.
What can be checked during an on-site review?
The customer can review the physical unit, model and identifying labels, exterior condition, connectors and packaging before handover.
Does this case confirm a factory acceptance test?
No. The case confirms an on-site physical review and direct collection. Testing and use were to take place in the customer's system the following day.
How is the downtime benefit stated?
The public result is expressed as a shorter replacement path and next-day readiness. No monetary saving is claimed because no verified cost basis was supplied.
Can't find the part number you need?
We source thousands of unlisted, obsolete and hard-to-find parts. Enter the part number below and our sourcing team will check availability.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Need Help with a Similar Sourcing Challenge?
Send us the part number, quantity and delivery country. Our team will review your requirements and confirm:
- ✓ Product condition and availability
- ✓ Lead time and applicable warranty
- ✓ Shipping options to your destination
For revision, date code or documentation requirements, please include them with your enquiry.
Mon–Fri 09:00–18:00 GMT+8 · Xiamen, China
Our sourcing, order review and quality-control processes are managed under a certified quality management system.
More Sourcing Case Studies
Explore how Apter Power supports industrial parts sourcing through product identification, verification, documentation and delivery coordination.
ISO 9001:2015 Quality Management Certification
Review the ISO 9001:2015 certificate for Apter Power, its certified scope, certificate number, validity, process-control purpose and the limits of management-system certification.
On-Site Verification for an Indonesian Power Plant
After a previous suspected-counterfeit purchase, an Indonesian power-plant customer used a 50/50 payment plan, visited Apter Power to inspect two Bently Nevada 3500/22M 288055-01 modules, requested COO documentation and approved next-day hotel delivery.
Evidence Before Delivery
A Dubai power-project customer visited Apter Power in Xiamen to inspect GE turbine-control cards, labels, packaging and visible condition before delivery.







