Features:
- 330104-00-03-50-02-00 combines M10x1 metric thread with full armor and zero unthreaded length for compact mounting.
- 30mm short case length and 5.0-meter total length suit tight installations with remote Proximitor placement.
- TipLoc and CableLoc deliver 330N pull strength; gold ClickLoc connectors ensure reliable vibration-resistant connections.
The 330104-00-03-50-02-00 features an extremely short 30 mm overall case length (03 × 10 mm increments), making it one of the most compact configurations in the 3300 XL probe family. This short case length is ideal for machinery with limited mounting depth, such as small compressors, gearboxes, or tight bearing housings where standard-length probes cannot fit. The zero unthreaded length (00) means the M10 x 1 threads begin immediately at the probe tip, eliminating any smooth cylindrical section before threading. This configuration satisfies the critical metric design rule requiring unthreaded length to be at least 20 mm less than case length (0 mm ≤ 30 mm - 20 mm = 10 mm).
The 330104-00-03-50-02-00 uses connector and cable option 02, which provides a standard cable without a connector protector. This configuration is suitable for general industrial environments where excessive moisture, oil, or dust are not present. The standard cable is more flexible than armored cable and easier to route through conduits. Agency approval option 00 means this probe carries no hazardous area certifications (CSA, ATEX, IECEx), making it suitable for non-hazardous locations only. For explosive atmospheres, option 05 should be selected instead.
The 330104-00-03-50-02-00 operates at standard temperatures up to 177°C (350°F), sufficient for most industrial turbomachinery applications including steam turbines, gas turbines, and compressors. The armored construction provides mechanical protection against crushing, cutting, and impact damage in harsh industrial environments. The armor consists of flexible AISI 302 stainless steel wrapped around the cable with a PFA (perfluoroalkoxyethylene) outer jacket. This construction resists abrasion when cables are routed through metal cable trays or along machine frames.
The 330104-00-03-50-02-00 Bently Nevada Proximity Probe may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330104-00-03-50-02-00 Proximity Probe Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
Bently Nevada 330104-00-03-50-02-00 Proximity Probe Specs
General
- Manufacturer GE / Bently Nevada
- Model 330104-00-03-50-02-00
- Condition New Original ready stock
- Product Family
330104-00-03-50-02-CN,330104-00-03-50-02-RU,330104-00-10-05-01-05
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Compact Radial Vibration Monitoring: Installed in an X-Y orthogonal pair (90° apart) on small to mid-sized fluid-film bearing housings (e.g., high-speed blowers, industrial fans, water pumps, and electric motors). It monitors the relative dynamic displacement of the rotor shaft to track shaft orbits and vibration amplitudes.
- High-Speed Gearbox Speed & Phase (Keyphasor) Sensing: Its low-profile length allows it to be mounted close to small gearboxes or auxiliary shafts. It targets a machined keyway or notch to provide an accurate rotational speed (RPM) readout and a dynamic phase reference angle for diagnostic machinery software.
- Static Gap & Eccentricity Tracking: Measures steady-state micro-level clearances and shaft thermal expansion during slow-speed machine turning gear operations before full start-up.
- Analog Signal Processing: The Proximitor excites the probe tip and processes the field impedance into a continuous negative DC bias voltage signal (-1V to -17V), where the superimposed AC voltage represents dynamic vibration.
- Digital Integration: This raw analog voltage runs down a 3-wire shielded link (like the 16925 cable) into a monitor channel card within the Bently Nevada 3500 Machinery Protection System or Orbit 60 panel.
- Direct Extension-Free Connection:The -50 configuration suffix indicates that the probe includes a factory-installed, continuous 5.0-meter (16.4 ft) coaxial cable.
- Ordinary/Safe Location Restriction (-00):The terminal -00 suffix specifies No Approvals. This hardware configuration lacks explosive atmosphere safety certifications like ATEX, IECEx, or CSA for intrinsic safety (Ex ia) or flameproof enclosures.
- Compliance Bound: This probe is strictly certified for non-hazardous, safe-area industrial zones only (e.g., clean water pump stations, standard open-air ventilation rooms, or conventional power generation halls without flammable gas accumulations).
- Mechanical Containment & Pressure Seal:The probe architecture is built with an integrated Viton O-ring that creates a secure seal between the Polyphenylene Sulfide (PPS) tip material and the M10 stainless steel case.