Features:
- M10 x 1 metric thread with armor protection provides enhanced mechanical durability for demanding industrial installations requiring standard metric mounting.
- 60 mm overall case length with 0.5 meter integral cable offers balanced reach for standard mounting applications while simplifying wiring in compact installations.
- CSA, ATEX, and IECEx approvals enable global hazardous area deployment without region-specific variants.
The 330104-00-06-05-02-05 is engineered with an M10 x 1 metric thread and full armor protection, delivering the enhanced durability of the 8 mm platform in a compact 60 mm case length. The armor shields the probe against crushing, abrasion, and impact damage during installation and operation, making it particularly valuable in applications where the probe may be subject to rough handling or where cables must be routed through restrictive conduit.
With CSA, ATEX, and IECEx approvals, the 330104-00-06-05-02-05 covers the hazardous area requirements for most industrial regions. A single part number serves a refinery in Texas, a chemical plant in Germany, or an offshore platform in the North Sea, eliminating the need to stock region-specific variants. This simplifies procurement for multinational projects and keeps spare parts inventory lean.br />
The 0.5-meter integral cable on the 330104-00-06-05-02-05 is designed for installations where the Proximitor sensor is located near the measurement point, eliminating excess wiring that would need to be managed in tight control cabinets. This compact cable length reduces clutter, simplifies routing, and minimizes the number of connection points in the monitoring path. For OEM equipment manufacturers, this short integral cable integrates cleanly into pre-wired panels and skid-mounted assemblies.
The 330104-00-06-05-02-05 Bently Nevada 3300 XL 8 mm Proximity Probes may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330104-00-06-05-02-05 3300 XL 8 mm Proximity Probes, Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330104-00-06-05-02-05 3300 XL 8 mm Proximity Probes, Specs
General
- Manufacturer GE / Bently Nevada
- Model 330104-00-06-05-02-05
- Condition New Original ready stock
- Product Family
330104-00-06-05-01-05,330104-00-06-05-11-05,330104-00-06-05-02-00
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Power and Energy: Shaft vibration and displacement monitoring of steam turbines, gas turbines, and generators.
- Petroleum and Chemical Industry: Operational status monitoring of centrifugal compressors, pumps, and reciprocating compressors.
- Mechanical Diagnosis: Used to measure the trajectory and eccentricity within bearing clearances, and as a keyphasor (phase reference) for speed measurement.
- Real-time Mechanical Protection: When the vibration amplitude or axial displacement exceeds the preset safety threshold, an alarm is triggered or an automatic shutdown (Trip) is initiated to prevent catastrophic equipment damage.
- System Self-Diagnosis (OK Circuit): A built-in self-test circuit automatically identifies probe disconnections, short circuits, or system power failures, ensuring the authenticity of monitoring signals and preventing false trips due to sensor malfunctions.
- High-Precision Data Acquisition: Provides linear output for spectral analysis and waveform diagnosis.
- Environmental Protection:This model typically comes with stainless steel armored tubing, enhancing physical durability in oily, corrosive, or mechanically abrasive environments.
- It offers a high level of immunity to radiofrequency interference (RFI/EMI) without requiring special shielding tubing.
- Upgrades and Compatibility: The 3300 XL system is fully physically and electrically interchangeable with older non-XL 3300 series 5mm/8mm components, allowing direct replacement of older sensors without recalibration.