Features:
- M10 x 1 Thread Interface with Armor Protection for Robust Industrial Installation
- Combines 3300 XL 8 mm Proximity Sensing Capability with FluidLoc Cable Technology
- Operates in Conjunction with 3500 Monitoring Systems and Industrial Vibration Analysis Equipment
The 330104-02-14-50-12-RU operates as the 3300 XL 8 mm Proximity Probe in industrial machinery protection systems, providing reliable non-contact displacement measurement for critical rotating equipment. It continuously converts mechanical vibration and shaft position data into electrical signals through 5.0 meters (16.4 feet) of FluidLoc cable, delivering accurate measurements via the miniature coaxial ClickLoc connector to support continuous monitoring of turbomachinery health. Seamless signal transmission is standard with the 330104-02-14-50-12-RU, however using the optional redundant sensor configurations will allow verification of readings through backup probes in the event of a primary sensor failure. The 330104-02-14-50-12-RU has made improvements in several areas over previous proximity probe designs in addition to incorporating CSA, ATEX, and IECEx hazardous area certifications within the 3300 XL system.
The 330104-02-14-50-12-RU provides essential sensing functions common to the entire monitoring path, and is a critical component of the protection system, directly affecting the proper, normal operation of rotating machinery such as turbines, compressors, and pumps. One or multiple 330104-02-14-50-12-RU proximity probes are required per machine depending on the desired monitoring coverage and redundancy level. The 330104-02-14-50-12-RU occupies a single probe mounting position with M10 x 1 thread specification and is always located with 20 mm unthreaded length and 140 mm overall case length for standardized installation.
For critical machinery protection applications, the 3300 XL System requires the 330104-02-14-50-12-RU proximity probe module installed in the designated sensor position. In addition to standard single probe operation, the redundant configuration also performs automatic verification. The 3300 XL dual probe configuration executes failover using the internal circuitry specified in the monitoring system options. Using this method, the redundant probe system continually monitors the health of both sensors. If the system detects that the primary proximity probe is no longer providing stable output (outside configured signal tolerance levels), it will automatically transfer the monitoring function to the secondary probe and place an event in the System Event List.
The 330104-02-14-50-12-RU Bently Nevada 3300 XL 8 mm Proximity Probe may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330104-02-14-50-12-RU 3300 XL 8 mm Proximity Probe Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330104-02-14-50-12-RU 3300 XL 8 mm Proximity Probe Specs
General
- Manufacturer GE / Bently Nevada
- Model 330104-02-14-50-12-RU
- Condition New Original ready stock
- Product Family 330104-02-14-50-12-BR,330104-02-14-50-12-CN,330104-02-14-50-12-05
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Radial Vibration: Measuring the dynamic movement of shafts in fluid-film bearing machines.
- Axial Position: Monitoring the static position (thrust) of a shaft relative to the bearing.
- Speed & Keyphasor Reference: Providing timing and speed signals from gear teeth or keyways.
- Extreme Environments: Designed for harsh conditions with a standard operating range of -51°C to +177°C (-60°F to 350°F).
- Condition Monitoring: Provides an output voltage proportional to the distance between the probe tip and target (standard 3.94 V/mm or 100 mV/mil).
- Gap Voltage Monitoring: Technicians typically set the gap at -9 Vdc to -11 Vdc for radial vibration to ensure the probe is centered in its linear range.
- Interchangeability: The 3300 XL series allows complete interchangeability of probes, cables, and sensors without requiring individual bench calibration.
- Physical Protection: Features a patented TipLoc molding for a stronger bond between the tip and body and CableLoc for 330 N (75 lbf) pull strength.
- Power Requirements: Operates on -17.5 Vdc to -26 Vdc.
- Mounting: The associated Proximitor Sensor can be mounted on a DIN-rail or in a traditional panel mount configuration.
- Material Calibration: Standard probes are factory-calibrated for AISI 4140 steel; calibration for other materials must be specified upon ordering.
- Wiring: Recommended field wiring is three-conductor shielded triad cable, with a maximum recommended length of 305 meters (1,000 feet) between the sensor and monitor.