Features:
- Non-Contact Displacement Measurement for Rotating Machinery Protection
- Combines Robust Armor Protection with Fluid-Resistant Cable Construction
- Operates in Conjunction with 3300 XL Proximitors and Standard 3500 Monitoring Systems
The 330104-00-25-10-12-00 operates as the 3300 XL 8 mm Proximity Probe in industrial machinery monitoring applications, providing reliable displacement measurement for critical rotating equipment. It continuously detects shaft position, vibration, and movement through eddy current technology and transmits this signal through the FluidLoc cable to support steady state operation of monitoring systems and protection modules. Seamless signal transmission is standard with the 330104-00-25-10-12-00, however using an optional extension cable configuration will allow flexible installation in challenging machinery layouts. The 330104-00-25-10-12-00 has made improvements in several areas over previous probe designs in addition to incorporating universal M10 x 1 thread mounting capability within industrial environments.
The 330104-00-25-10-12-00 provides essential measurement functions common to the entire machinery protection system, and is a critical component of the monitoring path, directly affecting the proper, normal operation of the overall vibration monitoring system. One or multiple 330104-00-25-10-12-00 probes are required per machine train depending on the desired measurement points. The 330104-00-25-10-12-00 occupies minimal radial space in the bearing housing and is always located at the measurement position (threaded into M10 x 1 mounting locations, the dedicated probe positions).
For Dual Vibration Monitoring applications, the 3300 System requires additional 330104-00-25-10-12-00 proximity probe modules installed in orthogonal positions. In addition to standard single probe operation, the redundant configuration also performs automatic signal validation. The 3300 dual probe configuration executes measurement using the internal circuitry specified in the proximitor options. Using this method, the redundant probe system continually monitors the health of both measurement channels. If the system detects that the primary 330104-00-25-10-12-00 probe is no longer providing stable output (outside configured voltage/tolerance levels), it will automatically flag the secondary measurement and place an event in the System Event List.
The 330104-00-25-10-12-00 Bently Nevada 3300 XL 8 mm Proximity Probe may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330104-00-25-10-12-00 3300 XL 8 mm Proximity Probe Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330104-00-25-10-12-00 3300 XL 8 mm Proximity Probe Specs
General
- Manufacturer GE / Bently Nevada
- Model 330104-00-25-10-12-00
- Condition New Original ready stock
- Product Family 330104-00-25-10-12-05,330104-00-25-10-12-CN,330104-00-25-10-02-00
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Vibration Measurement: Captures dynamic vibration on fluid-film bearing machines.
- Position Measurement: Monitors static positions, such as axial thrust or thermal expansion.
- Speed & Keyphasor®: Used for tachometer and overspeed measurements by tracking a timing mark on a rotating shaft.
- API 670 Standard: Fully compliant with the American Petroleum Institute’s (API) 670 Standard (4th Edition) for mechanical configuration, linear range, and accuracy when used as a 5-meter system.
- CE Mark: Satisfies European CE mark requirements for RFI/EMI immunity without needing special shielded conduit.
- Hazardous Area Approvals: Can be ordered with certifications including ATEX/IECEx and North American approvals for use in explosive environments.
- Environmental Resilience: Designed to withstand up to 93% humidity in accordance with IEC standard 68-2-3.
- Backward Compatibility: Components are interchangeable with non-XL 3300 series 5 mm and 8 mm transducer systems.
- Interchangeability: Probes, extension cables, and Proximitor® Sensors can be swapped without individual component matching or bench calibration.
- Mixed Systems: While XL and non-XL components can be mixed, system performance will be limited to the specifications of the non-XL components.
- Mounting: The 3300 XL Proximitor® Sensor fits the same 4-hole mounting footprint as older designs, allowing for easy upgrades.