Features:
- Armored eight-metre lead: The extension cable protects an 8.0 m run between probe and monitoring electronics.
- Protected connector: Option 03 combines cable armor with a connector protector.
- Approval configuration: Suffix 05 selects the specified agency-approval option.
Mechanical protection: Armor supports harsher routing conditions than the standard cable while the connector protector covers the detachable joint.
Length role: The extension forms part of the calibrated total transducer-system length.
Selection role: Construction, length and approval suffix all need to remain in the purchasing identity.
Apter Power supports Bently Nevada 330130-080-03-05 3300 XL 8 mm armored extension cable sourcing with quotations, technical documentation and configuration review.
Bently Nevada 330130-080-03-05 3300 XL 8 mm armored extension cable Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Cable armor: The selected construction provides continuous mechanical protection along the extension lead.
- Route planning: The armored profile needs enough bend and termination space in the machine path.
- Eight-metre reach: Code 080 provides the specified 8.0 m extension segment.
- System cable: The lead is electrically matched to the 3300 XL 8 mm transducer family.
- Joint protector: The 03 option includes local protection around the detachable connector.
- Separate roles: Armor protects the run while the protector addresses the connector area.
- Mating identity: The installed probe must use the corresponding 3300 XL connector style.
- Service access: The route should leave sufficient space to separate and reconnect the protected joint.
- Nine-metre configuration: A 1.0 m probe lead and this 8.0 m extension create the nominal 9 m chain.
- Electronics match: The selected Proximitor sensor must correspond to the complete system length.
- Approval context: The 05 option is interpreted with the complete certification and site conditions.
- Mixed-family boundary: An XL/non-XL combination is limited to non-XL system performance.
- Mechanically exposed runs: Armor supports probe-extension routing where added cable protection is needed.
- Protected joints: The connector protector covers the detachable connection in the transducer chain.
- Nine-metre monitoring channels: The cable supports documented 9 m systems with the appropriate probe and Proximitor.
- Approved configurations: The suffix identifies projects that require the specified agency-option version.