Features:
- Eight-and-a-half-metre length: The extension is sized for system combinations that need an 8.5 m cable segment.
- Flexible standard cable: The unarmored construction suits protected routing paths.
- Approval-option configuration: Suffix 05 identifies the specified agency-approval version.
Length planning: The 8.5 m segment is particularly useful with a 0.5 m probe lead in a nominal 9 m channel.
Connector planning: This configuration omits the separate connector protector, so the joint depends on the installation for mechanical coverage.
System planning: The cable, probe and Proximitor sensor remain a matched electrical chain.
Apter Power supports Bently Nevada 330130-085-00-05 3300 XL 8 mm extension cable sourcing with quotations, technical documentation and configuration review.
Bently Nevada 330130-085-00-05 3300 XL 8 mm extension cable Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Extension length: Code 085 provides an 8.5 m cable segment.
- Nine-metre pairing: A 0.5 m probe lead and this extension form the nominal 9 m length.
- Electronics match: The Proximitor sensor should be selected for the same completed system length.
- Electrical role: Cable length contributes to transducer scaling and cannot be treated only as spare routing allowance.
- Unarmored construction: The standard jacket keeps the extension flexible for protected paths.
- No protector option: Code 00 omits the separate cover around the detachable connector.
- Protected routing: Conduit or cabinet routing can provide the mechanical protection not included in the order code.
- FluidLoc boundary: The selected construction is not a FluidLoc cable.
- Approval option: Suffix 05 selects the published agency-approval configuration.
- System certification: The cable is considered with the probe, Proximitor and installation documentation.
- Site decision: Area classification and installation conditions remain project-specific.
- Identity value: Keeping the suffix on the RFQ separates this cable from the no-approval version.
- Half-metre probe combinations: The 8.5 m extension supports a nominal 9 m chain with a 0.5 m probe lead.
- Protected machine routes: Standard cable suits runs with enclosure or conduit protection.
- Approved transducer configurations: The order code serves projects that require the specified approval option.
- Configured spares: The uncommon length is preserved when the complete identifier is used for replacement sourcing.