Features:
- Compact non-contact sensing element designed for shallow or confined mounting spaces
- Shortened 48 mm case with 0.5 m integral cable and miniature coaxial connector
- Standard 3/8-24 UNF mounting thread for 7200 series machinery monitoring integration
The Bently Nevada 83607-00-48-05-02 Proximity Probe serves as the compact non-contact sensing interface between the rotating shaft surface and the 7200 series monitoring system. It continuously converts mechanical shaft displacement and vibration into regulated electrical signals through eddy current technology, supporting steady-state operation of machinery protection and condition monitoring modules in space-constrained installations.
The Bently Nevada 83607-00-48-05-02 Proximity Probe provides essential sensing functions critical to the entire measurement path, directly affecting the proper, normal operation of the overall vibration monitoring system. One probe is required per measurement point, and it must be securely threaded into the mounting location to maintain precise standoff distance from the metallic shaft surface.
For complete eddy current measurement applications, the monitoring system requires the Bently Nevada 83607-00-48-05-02 Proximity Probe to be paired with a compatible 7200 series extension cable and Proximitor signal conditioner. In addition to standard probe operation, this configuration performs automatic signal conditioning. The measurement system executes signal processing using the internal circuitry specified in the Proximitor unit.
The 83607-00-48-05-02 Bently Nevada Eddy Current Proximity Probe may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 83607-00-48-05-02 Eddy Current Proximity Probe Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 83607-00-48-05-02 Eddy Current Proximity Probe Specs
General
- Manufacturer Bently Nevada
- Model 83607-00-48-05-02
- Condition New Original ready stock
- Product Family 83607-00-75-05-02,83607-00-96-05-02
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Radial Vibration: Measures dynamic shaft movement inside fluid-film bearings.
- Axial Thrust Position: Monitors axial shaft drift to detect thrust bearing wear.
- Speed Tracking: Acts as a Keyphasor to measure RPM and phase reference angle.
- Emergency Trips: Inputs directly to 3500 racks for automatic machinery shutdowns.
- Target Assets: Used on gas turbines, centrifugal compressors, gearboxes, and large pumps.
- Temperature Range: Operates reliably from -52°C to +177°C (-62°F to +351°F).
- Chemical Resistance: PPS plastic tip and stainless steel body resist hot lube oil.
- Pressure Sealing: Built-in Viton O-ring prevents process fluid leakage through casings.
- Hazardous Areas: Certified under ATEX, IECEx, and CSA for explosive atmospheres.
- Material Calibration: Factory-calibrated to AISI 4140 steel targets.
- Side Clearance: Requires a clear radius around the tip to prevent cross-talk with walls.
- Connector Care: Hand-tighten the ClickLoc coaxial joint and slide the protector sleeve over it.
- System Length: Must connect to a Proximitor matching the specific 5-meter or 9-meter system loop.