Features:
- 20 ft standard cable length corresponding to approximately 6.0 m.
- Two-conductor twisted and shielded 22 AWG cable construction.
- Moisture-resistant female connector with terminal-lug termination.
9571-20 provides the 20-foot configuration within the Bently Nevada 9571 standard interconnect cable family.
Its shielded twisted-conductor construction provides the signal connection required between compatible vibration sensing equipment and associated instrumentation.
The connector arrangement combines a two-socket female connection at the transducer side with individual terminal lugs at the monitoring-equipment side.
The Bently Nevada 9571-20 Standard Interconnect Cable may be available for purchase and technical support from Apter Power.
Bently Nevada 9571-20 Standard Interconnect Cable Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Conductors: Two twisted signal conductors are used in the 9571-20 cable.
- Wire Size: Each conductor is specified as 22 AWG (0.5 mm²).
- Shielding: The conductor pair is provided with shielding for the signal cable assembly.
- Configuration: 9571-20 is the standard non-armored version of the interconnect cable.
- Monitoring Connection: 9571-series cables are specified for connection to compatible monitoring equipment.
- Sensor Use: The 9571 cable family is listed with selected Bently Nevada vibration sensors and accelerometers.
- 2300 Systems: 9571 cables are included in documented Bently Nevada 2300 monitoring configurations using supported sensors.
- Restriction: The 9571 cable family is not specified for use with the 21128 Velocity Transducer Housing.
- Operating Range: The specified cable operating temperature is -50°C to +120°C.
- Connector Protection: The sensor-side female connector uses a moisture-resistant design.
- Length Range: The 9571 family is available from 2 ft to 99 ft depending on the selected suffix.
- Selected Length: The -20 suffix specifies the 20 ft, approximately 6.0 m, cable configuration.
- Vibration Monitoring: 9571-20 provides an interconnection path in compatible machinery vibration measurement arrangements.
- Monitor Interface: The cable connects supported transducer outputs to monitoring equipment through terminal-lug termination.
- Data Collection: The 9571 cable family is specified for compatible vibration data collection arrangements.
- Sensor Systems: Supported Bently Nevada documentation lists 9571 cables with selected velocity sensors and accelerometer systems.